Change search
ReferencesLink to record
Permanent link

Direct link
Design of Parametric Winglets and Wing tip devices: A Conceptual Design Approach
Linköping University, Department of Management and Engineering, Fluid and Mechatronic Systems. Linköping University, The Institute of Technology.
2012 (English)Independent thesis Advanced level (degree of Master (Two Years)), 20 credits / 30 HE creditsStudent thesis
Abstract [en]

Winglets being a small structure play an important role in reducing the induced drag in aircraft. Many types of winglets have been designed and their significance in reducing the drag is published. One of the main objectives of this master thesis work is to study about the winglet design and about their contribution in reducing induced drag. A brief overview of wing tip devices and their performance from the manufacturers as well as from airliner’s point of view are discussed. Moreover, the role of winglet in reducing the drag of commercial civil jet aircraft is studied and the percentage of drag reduction is calculated by a conceptual approach. A320 specifications are taken to perform induced drag reduction calculation with and without winglets. Indeed, the total drag count reduced with the help of winglets accounts for additional payload which will be an advantage for the aircraft operator.

Reducing the process time in design is one of the important criteria for any field and hence automation with help of CAD tools is very significant in reducing time. This study also aims at developing an automated model for different types of winglets and wing tip devices with the help of CAD technology focused on reducing design time during the initial design process.  Knowledge based approach is used in this work and all the models are parameterized so each model could be varied with associated parameters. The generic model created would take different shapes and switches between different types of wing tip devices as per the user’s requirement with the help of available parameters. Knowledge Pattern (KP) approach is used to develop the automation process. User Defined Features (UDFs) are created for each type of winglet and tip devices. CATIA V5 R18 software is used to develop the models of winglets and tip devices.

Place, publisher, year, edition, pages
2012. , 71 p.
Keyword [en]
Winglet, Induced drag, CATIA V5, Knowledge Pattern, Parameterization.
National Category
Mechanical Engineering
URN: urn:nbn:se:liu:diva-80721ISRN: LIU-IEI-TEK-A--12/01371--SEOAI: diva2:547954
Subject / course
Mechanical Engineering
2012-06-13, A37, Linkoping University, Linkoping, 13:15 (English)
Available from: 2012-08-29 Created: 2012-08-29 Last updated: 2012-08-29Bibliographically approved

Open Access in DiVA

fulltext(2458 kB)14948 downloads
File information
File name FULLTEXT01.pdfFile size 2458 kBChecksum SHA-512
Type fulltextMimetype application/pdf

By organisation
Fluid and Mechatronic SystemsThe Institute of Technology
Mechanical Engineering

Search outside of DiVA

GoogleGoogle Scholar
Total: 14948 downloads
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

Total: 799 hits
ReferencesLink to record
Permanent link

Direct link