Change search
ReferencesLink to record
Permanent link

Direct link
Step-wise smoothing of ZUPT-aided INS
KTH, School of Electrical Engineering (EES), Signal Processing.
2012 (English)Student paper other, 20 credits / 30 HE creditsStudent thesis
Abstract [en]

Due to the recursive nature of most foot-mounted zero-velocityupdate-aided (ZUPT-aided) inertial navigation systems (INSs), the error covariance increases throughout each step and "collapses" at the end of the step, where the ZUPT correction is done. This gives sharp corrections and discontinuities in the estimated trajectory. For applications with tight real-time constraints, this behavior is unavoidable, since every estimate corresponds to the best estimate given all the information up until that time instant. However, for many applications, some degree of lag (non-causality) can be tolerated and the information provided by the ZUPTs at the end of a step, giving the sharp correction, can be made available throughout the step. Consequently, to eliminate the sharp corrections and the unsymmetrical covariance over the steps, the implementation of a smoothing filter for a ZUPT-aided INS is considered in this thesis. To our knowledge, no formal treatment of smoothing for such systems has previously been presented, even though an extensive literature on the general subject exists.

Owing to the customary closed-loop complementary filtering used for aided INS, standard smoothing techniques cannot directly be applied. Also since the measurements (the ZUPTs) are irregularly spaced and appear in clusters, some varying-lag smoothing rule is necessary. Therefore, a method based on a mixed open-closedloop complementary filtering combined with a Rauch-Tung-Striebel (RTS) smoothing is suggested in this thesis. Different types of varying-lag smoothing rules are examined. For near real-time applications, smoothing is applied to the data in a step-wise manner. The intervals (steps) for the smoothing are determined based on measurement availability and covariance and timing thresholds. For complete o-line processing, full data set smoothing is examined. Finally, the consequences of the smoothing and the open-closed-loop filtering are quantified based on real data. The impact of the smoothing throughout the steps is illustrated and analyzed.

Place, publisher, year, edition, pages
2012. , 54 p.
EES Examensarbete / Master Thesis, XR-EE-SB 2012:011
National Category
Electrical Engineering, Electronic Engineering, Information Engineering
URN: urn:nbn:se:kth:diva-99202OAI: diva2:541630
Available from: 2012-07-20 Created: 2012-07-20 Last updated: 2012-07-20Bibliographically approved

Open Access in DiVA

fulltext(4269 kB)2262 downloads
File information
File name FULLTEXT01.pdfFile size 4269 kBChecksum SHA-512
Type fulltextMimetype application/pdf

Search in DiVA

By author/editor
Colomar Simón, David
By organisation
Signal Processing
Electrical Engineering, Electronic Engineering, Information Engineering

Search outside of DiVA

GoogleGoogle Scholar
Total: 2262 downloads
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

Total: 448 hits
ReferencesLink to record
Permanent link

Direct link