Change search
ReferencesLink to record
Permanent link

Direct link
Simulation of a lab-scale methanation reactor
KTH, School of Chemical Science and Engineering (CHE), Chemical Engineering and Technology.
2011 (English)Independent thesis Advanced level (degree of Master (Two Years)), 20 credits / 30 HE creditsStudent thesisAlternative title
Simulering av metaniseringsreaktor (Swedish)
Abstract [en]

By the everyday increasing enthusiasm for using renewable-sustainable sources in energy production area, focusing on one and optimizing it in the best possible way should be of much interest.

Biogas production from anaerobic digestion of wastes is a well known energy source which could be applied more efficiently if the CO2portion of it would be upgraded to CH4as well. There is a methanation reaction which could convert carbon dioxide to methane with the use of hydrogenation.

In this report, the effort is to simulate this methanation reactor which is a catalytic bed of ruthenium on alumina base. The temperature change and its’ effect on reaction kinetics and equilibrium, also deriving designing parameters for the catalyst bed are different tasks which was tried to be covered in this thesis work.

Based on calculations, the reactor can operate isothermally or adiabatically. The point is that each method has its own cons and pros. For the isothermal case finally the optimum temperature to run the reaction is decided to be 600 K in 10 bar total pressure. In adiabatic case then it is understood to work on interstage cooling strategy which in given conditions came to the number of 6 for reactors and 5 for interstage cooling devices.

Afterwards it is thought to apply some technical changes to conventional adiabatic method and recycle some part of the product to the entrance of the reactor and assist the conversion. In this method number of reactors would be reduced to 2 and one heat exchanger in the middle.

Selecting the best process in large scale treatment, needs lots of economical analysis and detail design while in small scale condition the most preferred method to run the reaction is isothermal.

Place, publisher, year, edition, pages
2011. , 33 p.
Keyword [en]
Biogas, methanation reactor, Ruthenium catalyst, isothermal, adiabatic
National Category
Chemical Engineering
URN: urn:nbn:se:kth:diva-90395OAI: diva2:505342
Subject / course
Chemical Engineering
Educational program
Degree of Master
Physics, Chemistry, Mathematics
Available from: 2012-02-23 Created: 2012-02-23 Last updated: 2012-02-23Bibliographically approved

Open Access in DiVA

fulltext(548 kB)526 downloads
File information
File name FULLTEXT01.pdfFile size 548 kBChecksum SHA-512
Type fulltextMimetype application/pdf

By organisation
Chemical Engineering and Technology
Chemical Engineering

Search outside of DiVA

GoogleGoogle Scholar
Total: 526 downloads
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

Total: 220 hits
ReferencesLink to record
Permanent link

Direct link