Change search
ReferencesLink to record
Permanent link

Direct link
Study on Zero-Crossing-Based ADCs for Smart Dust Applications
Linköping University, Department of Electrical Engineering, Electronics System.
Linköping University, Department of Electrical Engineering, Electronics System.
2011 (English)Independent thesis Advanced level (degree of Master (Two Years)), 20 credits / 30 HE creditsStudent thesis
Abstract [en]

The smart dust concept is a fairly recent phenomenon to engineering. It assumes monitoring of a real natural environment in which motes or smart dust machines swarm in collective and coordinate information among themselves and/or to a backend control platform. In analog mixed signal field work on such devices is gaining momentum such that it is conceived to be one of the emerging fields in technology, and work was only possible once the technology for fabrication touched the nanoscale regions. Smart dust network involves remote devices connected in a hive sensing burst type datum signals from the environment and relaying information amongst themselves in an energy efficient manner to coordinate an appropriate response to a detected stimulus. The project presumed a RF based communication strategy for coordination amongst the devices through a wireless medium. That is less susceptible to stringent requirements of LOS and a base band processing system that comprised of an environment sensor, an AFE module, an ADC, a DSP and a DAC. Essentially a 10 bit, 2 Mega Hertz MHz pipelined ADC implemented in a STM 65nm technology. The ADC benefits the smart dust device in allowing it to process data in an energy efficient way and also focusing on reduced complexity as itsdesign feature. While it differs in the other ADC of the system by operating at a higher frequency and assuming a different design philosophy assuming a coherent system sensitive to a clock. The thesis work assumes that various features ofenergy harvesting, regulation and power management present in the smart dustmote would enable the system to contain such a diverse ADC. The ADCs output digital datum would be compatible to the rest of the design modules consisting mainly of DSP sections. The ADC novelty is based on the fact that it removes the necessity of employing a high power consuming OpAmp whose design parameters become more complex as technology scales to the nanoscale era and further down. A systematic, bottom up, test driven approach to design is utilized and various behaviours of the system are captured in Cadence design environment with verilogto layout models and MATLAB and Simulink models.

Place, publisher, year, edition, pages
2011. , 177 p.
Keyword [en]
smart dust, Comparator Based Switched Capacitor (CBSC), Zero Crossing Based Circuit(ZCBC), Analog to Digital Converter (ADC)
National Category
Other Electrical Engineering, Electronic Engineering, Information Engineering
URN: urn:nbn:se:liu:diva-73065ISRN: LiTH-ISY-EX--11/4491--SEOAI: diva2:465643
Subject / course
Electronics Systems
2011-08-18, Nöllstallet, Linköping Universitet, Linköping, 10:00 (English)
Available from: 2012-01-10 Created: 2011-12-15 Last updated: 2012-01-10Bibliographically approved

Open Access in DiVA

fulltext(21877 kB)913 downloads
File information
File name FULLTEXT01.pdfFile size 21877 kBChecksum SHA-512
Type fulltextMimetype application/pdf

By organisation
Electronics System
Other Electrical Engineering, Electronic Engineering, Information Engineering

Search outside of DiVA

GoogleGoogle Scholar
Total: 913 downloads
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

Total: 313 hits
ReferencesLink to record
Permanent link

Direct link