Change search
ReferencesLink to record
Permanent link

Direct link
Shear Capacity of Steel Fibre Reinforced Concrete Beams without Conventional Shear Reinforcement
KTH, School of Architecture and the Built Environment (ABE), Civil and Architectural Engineering, Structural Design and Bridges.
2011 (English)Independent thesis Advanced level (professional degree), 20 credits / 30 HE creditsStudent thesis
Abstract [en]

While the increase in shear strength of Steel Fibre Reinforced Concrete (SFRC) is well recognized, it has yet to be found common application of this material in building structures and there is no existing national standard that treats SFRC in a systematic manner.

The aim of the diploma work is to investigate the shear strength of fibre reinforced concrete beams and the available test data and analyse the latter against the mostpromising equations available in the literature. The equations investigated are:Narayanan and Darwish’s formula, the German, the RILEM and the Italian guidelines. Thirty articles, selected among over one hundred articles taken from literature, have been used to create the database that contains almost 600 beams tested in shear. This large number of beams has been decreased to 371 excluding all those beams and test that do not fall within the limitation stated for this thesis. Narayanan and Darwish’s formula can be utilized every time that the fibre percentage, the type of fibres, the beam dimensions, the flexural reinforcement and the concrete strength class have been defined. On the opposite, the parameters introduced in the German, the RILEM and the Italian guidelines always require a further characterization of the concrete (with bending test) in order to describe the post‐cracking behaviour. The parameters involved in the guidelines are the residual flexural tensile strengths according to the different test set‐ups. A method for predicting the residual flexural tensile strength from the knowledge of the fibre properties, the cylindrical compressive strength of the concrete and the amount of fibres percentage is suggested. The predictions of the shear strength, obtained using the proposed method for the residual flexural tensile strength, showed to be satisfactory when compared with the experimental results.

A comparison among the aforementioned equations corroborate the validity of the empirical formulations proposed by Narayanan and Darwish nevertheless only the other equations provide a realistic assessments of the strength, toughness and ductility of structural elements subjected to shear loading. Over the three investigated equations, which work with the post‐cracking characterization of the material, the Italian guideline proposal is the one that, due to its wide domain of validity and the results obtained for the gathered database of beams, has been selected as the most reliable equation.

Place, publisher, year, edition, pages
2011. , 113 p.
Trita-BKN-Examensarbete, ISSN 1103-4297 ; 331
Keyword [en]
Steel Fibre Reinforced Concrete, shear, Narayanan and Darwish´s Equation, RILEM, CNR, DafStB, post-cracking, flexural tensile strength
National Category
Civil Engineering
URN: urn:nbn:se:kth:diva-41016OAI: diva2:460512
Subject / course
Structural Design and Bridges
Educational program
Master of Science in Engineering - Urban Management
Available from: 2011-11-30 Created: 2011-09-23 Last updated: 2011-11-30Bibliographically approved

Open Access in DiVA

fulltext(6724 kB)11824 downloads
File information
File name FULLTEXT01.pdfFile size 6724 kBChecksum SHA-512
Type fulltextMimetype application/pdf

By organisation
Structural Design and Bridges
Civil Engineering

Search outside of DiVA

GoogleGoogle Scholar
Total: 11824 downloads
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

Total: 942 hits
ReferencesLink to record
Permanent link

Direct link