Change search
ReferencesLink to record
Permanent link

Direct link
Beyond PDMS: off-stoichiometry thiol–ene (OSTE) based soft lithography for rapid prototyping of microfluidic devices
KTH, School of Electrical Engineering (EES), Microsystem Technology (Changed name 20121201).
KTH, School of Electrical Engineering (EES), Microsystem Technology (Changed name 20121201).ORCID iD: 0000-0002-0441-6893
KTH, School of Chemical Science and Engineering (CHE), Fibre and Polymer Technology, Coating Technology.
KTH, School of Chemical Science and Engineering (CHE), Fibre and Polymer Technology, Coating Technology.ORCID iD: 0000-0002-9200-8004
Show others and affiliations
2011 (English)In: Lab on a Chip, ISSN 1473-0197, E-ISSN 1473-0189, Vol. 11, no 18, 3136-3147 p.Article in journal (Refereed) Published
Abstract [en]

In this article we introduce a novel polymer platform based on off-stoichiometry thiol–enes (OSTEs), aiming to bridge the gap between research prototyping and commercial production of microfluidic devices. The polymers are based on the versatile UV-curable thiol–ene chemistry but takes advantage of off-stoichiometry ratios to enable important features for a prototyping system, such as one-step surface modifications, tuneable mechanical properties and leakage free sealing through direct UV-bonding. The platform exhibits many similarities with PDMS, such as rapid prototyping and uncomplicated processing but can at the same time mirror the mechanical and chemical properties of both PDMS as well as commercial grade thermoplastics. The OSTE-prepolymer can be cast using standard SU-8 on silicon masters and a table-top UV-lamp, the surface modifications are precisely grafted using a stencil mask and the bonding requires only a single UV-exposure. To illustrate the potential of the material we demonstrate key concepts important in microfluidic chip fabrication such as patterned surface modifications for hydrophobic stops, pneumatic valves using UV-lamination of stiff and rubbery materials as well as micromachining of chip-to-world connectors in the OSTE-materials.

Place, publisher, year, edition, pages
RSC Publishing, 2011. Vol. 11, no 18, 3136-3147 p.
Keyword [en]
LoC lab-on-chip OSTE thiol-enes microfluidics
National Category
Chemical Sciences
URN: urn:nbn:se:kth:diva-38607DOI: 10.1039/c1lc20388fISI: 000294263400014ScopusID: 2-s2.0-80052226391OAI: diva2:437753

QC 20110831

Available from: 2011-08-30 Created: 2011-08-30 Last updated: 2015-07-14Bibliographically approved
In thesis
1. Development of materials, surfaces and manufacturing methods for microfluidic applications
Open this publication in new window or tab >>Development of materials, surfaces and manufacturing methods for microfluidic applications
2011 (English)Doctoral thesis, comprehensive summary (Other academic)
Abstract [en]

This thesis presents technological advancements in microfluidics. The overall goals of the work are to develop new miniaturized tests for point-of-care diagnostics and robust super-lubricating surfaces for friction reduction. To achieve these goals, novel materials, surfaces and manufacturing methods in microfluidics have been developed.

Point-of-care diagnostic tests are portable miniaturized instruments that downscale and automate medical tests previously performed in the central laboratories of hospitals. The instruments are used in the doctor’s office, in the emergency room or at home as self-tests. By bringing the analysis closer to the patient, the likelihood of an accurate diagnosis, or a quick therapy adjustment is increased. Already today, there are point-of-care tests available on the market, for example blood glucose tests, rapid streptococcus tests and pregnancy tests. However, for more advanced diagnostic tests, such as DNA-tests or antibody analysis, integration of microfluidic functions for mass transport and sample preparation is required. The problem is that the polymer materials used in academic development are not always suited for prototyping microfluidic components for sensitive biosensors. Despite the enormous work that has gone into the field, very few technical solutions have been implemented commercially.

The first part of the work deals with the development of prototype point of-care tests. The research has focused on two major areas: developing new manufacturing methods to leverage the performance of existing materials and developing a novel polymer material platform, adapted for the extreme demands on surfaces and materials in miniaturized laboratories. The novel manufacturing methods allow complex 3D channel networks and the integration of materials with different surface properties. The novel material platform is based on a novel off-stoichiometry formulation of thiol-enes (OSTE) and has very attractive material and manufacturing properties from a lab-on-chip perspective, such as, chemically stable surfaces, low absorption of small molecules, facile and inexpensive manufacturing process and a biocompatible bonding method. As the OSTE-platform can mirror many of the properties of commercially used polymers, while at the same time having an inexpensive and facile manufacturing method, it has potential to bridge the gap between research and commercial production.

Friction in liquid flows is a critical limiting factor in microfluidics, where friction is the dominant force, but also in marine applications where frictional losses are responsible for a large part of the total energy consumption of sea vessels. Microstructured surfaces can drastically reduce the frictional losses by trapping a layer of air bubbles on the surface that can act as an air bearing for the liquid flow. The problem is that these trapped air bubbles collapse at the liquid pressures encountered in practical applications.

The last part of the thesis is devoted to the development of novel low fluidfriction surfaces with increased robustness but also with active control of the surface friction. The results show that the novel surfaces can resist up to three times higher liquid pressure than previous designs, while keeping the same friction reducing capacity. The novel designs represent the first step towards practical implementation of micro-structured surfaces for friction reduction.

Place, publisher, year, edition, pages
Stockholm: KTH Royal Institute of Technology, 2011. xiii, 87 p.
Trita-EE, ISSN 1653-5146 ; 2011:058
microsystem technology, MEMS, microfluidics, polymers, off-stoichiometry thiol-ene, point-of-care, lab-on-chip
National Category
Electrical Engineering, Electronic Engineering, Information Engineering
urn:nbn:se:kth:diva-38605 (URN)978-91-7501-086-1 (ISBN)
Public defence
2011-09-23, F3, Lindstedtsvägen 26, KTH, Stockholm, 10:00 (English)

QC 20110907

Available from: 2011-09-02 Created: 2011-08-30 Last updated: 2012-09-03Bibliographically approved

Open Access in DiVA

fulltext(826 kB)92 downloads
File information
File name FULLTEXT01.pdfFile size 826 kBChecksum SHA-512
Type fulltextMimetype application/pdf

Other links

Publisher's full textScopusPublisher's website

Search in DiVA

By author/editor
Carlborg, Carl FredrikHaraldsson, TommyÖberg, KimMalkoch, Michaelvan der Wijngaart, Wouter
By organisation
Microsystem Technology (Changed name 20121201)Coating Technology
In the same journal
Lab on a Chip
Chemical Sciences

Search outside of DiVA

GoogleGoogle Scholar
Total: 92 downloads
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

Altmetric score

Total: 695 hits
ReferencesLink to record
Permanent link

Direct link