Change search
ReferencesLink to record
Permanent link

Direct link
Management of High Speed Machinery Signatures to Meet Stealth Requirement in the Royal Swedish Navy Visby Class Corvette (YS2000) 
Swedish National Defence College, Department of Military Studies, Military-Technology Division.
2001 (English)In: IGTI 2001, 2001, 2001-GT-0214- p.Conference paper (Other academic)
Abstract [en]

Over the years, the word stealth has been used more and more when discussing design and operational characteristics in military applications. New and more challenging techniques are constantly being applied to minimize signatures and thus hinder or delay detection and identification.The Visby Class Corvette is a multipurpose combat ship with 600 tons displacement. The hull is a sandwich construction of a PVC core with carbon fiber/vinyl laminate. The propulsion system consists of two identical CODOG machinery systems, each driving a KaMeWa 125 size Water Jet Unit.The Ship has special requirements for all signatures, i.e. Radar-, Hydro acoustics-, IR- and Magnetic Signature.The High Speed Machinery is twin Honeywell TF50A Gas Turbines, cantilever mounted side by side on the Main Reduction Gearbox housing. The Main Reduction Gearbox is a dual input high performance marine Gearbox designated MA -107 SBS, designed and manufactured by Cincinnati Gear Co.The Low Speed Machinery is a MTU 16 V 2000 TE90 Diesel Engine connected to the MRG by a power take in shaft.Combustion Air for the Gas Turbines is ducted from the shipside Air Inlet Screen (radar screen) via 3-stage separating filters. The Exhausts from the twin Gas Turbines are combined into one Exhaust Pipe and ducted to the ship transom above the Water Jet stream.Very little can be changed in the Gas Turbine, but high quality such as well balanced rotating part contributes to reduce the signatures. However, the main work has to be accomplished by the building shipyard in cooperation with the Gas Turbine manufacturer. The Main Reduction Gearbox is more available for changes to reduce signatures, but even for the Gearbox the building shipyard has to take design and installation measures.The HSM installation consist mainly of the Gas Turbine Engine, the Main Reduction Gear, Water Jets Unit and surrounding equipment such as main shaft, bearings and so on. The emphasis in this paper is on the GT, MRG and their effect on some of the more well known signatures i.e. RCS, IR, Hydro acoustics and Magnetic. Also some design measures are discussed.

Place, publisher, year, edition, pages
2001. 2001-GT-0214- p.
National Category
Vehicle Engineering
Research subject
Militärteknik
Identifiers
URN: urn:nbn:se:fhs:diva-1137OAI: oai:DiVA.org:fhs-1137DiVA: diva2:406413
Conference
IGTI 2001
Available from: 2011-04-14 Created: 2011-03-25 Last updated: 2011-04-14Bibliographically approved

Open Access in DiVA

fulltext(482 kB)1043 downloads
File information
File name FULLTEXT01.pdfFile size 482 kBChecksum SHA-512
7f0bacdcb4e3b7044bd949b3703202eee9a91c1df6fc8fb5ea80cd697fcde6d09d1badfa3c3e40eab4608ce4ff208e57828f7dcd82122570050faee95e68c8fb
Type fulltextMimetype application/pdf

Search in DiVA

By author/editor
Liwång, Hans
By organisation
Military-Technology Division
Vehicle Engineering

Search outside of DiVA

GoogleGoogle Scholar
Total: 1043 downloads
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

Total: 338 hits
ReferencesLink to record
Permanent link

Direct link