The purpose of this thesis is to enlighten Boetten Bygg ABconcerning Lean Construction and its methods, which can benefittheir work towards reduction of non-valuable activities during theproduction phase. The examination took place at two projects thatBoetten is working with in Sigtuna and Sollentuna. Both projectswere in the same phase. The method used were to visit the projectsand get an overview of how they’re working today. This was done byattending weekly meetings between the leading parties from Boettenas well as the leading persons from each of the contractors, wealso handed out a survey where the participants evaluate theproblems that can occur.

The literature study lifts the basic principles of LeanConstruction, where we have chosen to focus on three differentLean methods that may help Boetten to decrease the wastingactivities in their future projects. We adressed the procurementof a project to lift the pros and cons that this contributes. Byusing this theory, we have discussed the subject round thequestion formulation:

•Where in the production process is the biggest potential fordecreasing wasting activities?

•Which Lean methods would generate the most valuable improvementadjusted to their organization?

•How can Boetten go through with a change in the productionprocess?

The gathered result shows the three dominating problem areas werewaiting, the arrangement on the construction site and thecommunication between involved parties. Based on the result wediscussed Boettens way of working to narrate, with grounds fromthe literature study, how an improvement may be carried out. Thestudy shows that an implementation of Lean Construction has thepossibility to minimize the wastage. The methods which wereconsidered to make the biggest change concerning wastingactivities were 5S, Just-In-Time and Last Planner. In order forthis to be possible, a strategy decision is required at amanagement level