The thesis paper here focuses on the effects of the austempering temperature (TA) and the austempering time (tA) on the unalloyed fully ferrite Compacted Graphite Iron (CGI), to obtain improve in mechanical properties and the study of the microstructure. The unalloyed CGI samples were austenitised at 850oC for 60 and 90 min and were then heat treated at 275, 325 and 375oC with different holding times at 30,60,90, and 120 mins. Mechanical properties like the tensile strength, yield strength, young’s modulus, Brinell and Vickers harness were conducted to perform the analysis on the samples. LOM was used for the study of the microstructure and SEM was used for the study of fractography of the fractured tensile bar.