Change search
CiteExportLink to record
Permanent link

Direct link
Cite
Citation style
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Other style
More styles
Language
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Other locale
More languages
Output format
  • html
  • text
  • asciidoc
  • rtf
CFD and Experimental Study of Refuelling and Venting a Fuel System
Luleå University of Technology, Department of Computer Science, Electrical and Space Engineering, Space Technology.
Linköping University.
2019 (English)Independent thesis Advanced level (degree of Master (Two Years)), 20 credits / 30 HE creditsStudent thesis
Abstract [en]

In 1999, California Air Resources Board (CARB) implemented a regulation that required all gasoline cars sold in California be fitted with an Onboard Refueling Vapor Recovery System (ORVR). The ORVR system is designed to prevent Volatile Organic Compounds (VOCs) from escaping into the atmosphere during refuelling by storing the gas vapours in a carbon canister. Due to the complex nature of the fuel system, making design changes could have large implications on the ORVR performance of the vehicle. It is therefore desirable to develop a CFD model that can predict the effects of design changes, thereby reducing the need to perform physical tests on each design iteration. This master thesis project was performed at the Fuel Systems department at Volvo Cars in order to help reduce project lead times and product development costs by incorporating CFD as a part of the fuel system development cycle. The CFD results obtained were validated through experimental tests that were also performed as part of this project. In this master thesis project, a CFD model was developed to simulate the refuelling of gasoline for a California specification Volvo XC90 with an OPW-11B pump pistol. The model was set up in STAR-CCM+ using the Eulerian Volume of Fluid model for multiphase flow, the RANS realizable k − ε turbulence model and the two layer all y + wall treatment. The effects of the carbon canister were modelled as a porous baffle interface in the simulations where viscous and inertial resistances of the porous media were adjusted to obtain a desired pressure drop across the canister. This method proved to be a suitable simplification for this study. The effects of evaporation as well as a chemical adsorption model for the carbon canister have been excluded from the project due to time limitations. It was found that the CFD simulations were in good agreement with the experimental results, especially with respect to capturing the overall behaviour of the fuel system during refuelling. It was found that resolving the flow spatially (and temporally) in the filler pipe was a crucial part in ensuring solver stability. A pressure difference between experiment and simulation was also observed as a consequence of excluding evaporation from the CFD model. After the CFD model had been verified and validated, changes to different parts of the fuel system were investigated to observe their effects on ORVR performance. These included changing the recirculation line diameter, changing the carbon canister properties and changing the angle of how the pump pistol was inserted into the capless unit. It was found that the recirculation line diameter is a very sensitive design parameter and increasing the diameter would result in fuel vapour leaking back out into the atmosphere. Similarly, increasing the back pressure by swapping to a different carbon canister would result in the leakage of fuel vapour. On the other hand, insignificant changes in system behaviour were observed when the fuel pistol angle was changed.In 1999, California Air Resources Board (CARB) implemented a regulation that required all gasoline cars sold in California be fitted with an Onboard Refueling Vapor Recovery System (ORVR). The ORVR system is designed to prevent Volatile Organic Compounds (VOCs) from escaping into the atmosphere during refuelling by storing the gas vapours in a carbon canister. Due to the complex nature of the fuel system, making design changes could have large implications on the ORVR performance of the vehicle. It is therefore desirable to develop a CFD model that can predict the effects of design changes, thereby reducing the need to perform physical tests on each design iteration. This master thesis project was performed at the Fuel Systems department at Volvo Cars in order to help reduce project lead times and product development costs by incorporating CFD as a part of the fuel system development cycle. The CFD results obtained were validated through experimental tests that were also performed as part of this project. In this master thesis project, a CFD model was developed to simulate the refuelling of gasoline for a California specification Volvo XC90 with an OPW-11B pump pistol. The model was set up in STAR-CCM+ using the Eulerian Volume of Fluid model for multiphase flow, the RANS realizable k − ε turbulence model and the two layer all y + wall treatment. The effects of the carbon canister were modelled as a porous baffle interface in the simulations where viscous and inertial resistances of the porous media were adjusted to obtain a desired pressure drop across the canister. This method proved to be a suitable simplification for this study. The effects of evaporation as well as a chemical adsorption model for the carbon canister have been excluded from the project due to time limitations. It was found that the CFD simulations were in good agreement with the experimental results, especially with respect to capturing the overall behaviour of the fuel system during refuelling. It was found that resolving the flow spatially (and temporally) in the filler pipe was a crucial part in ensuring solver stability. A pressure difference between experiment and simulation was also observed as a consequence of excluding evaporation from the CFD model. After the CFD model had been verified and validated, changes to different parts of the fuel system were investigated to observe their effects on ORVR performance. These included changing the recirculation line diameter, changing the carbon canister properties and changing the angle of how the pump pistol was inserted into the capless unit. It was found that the recirculation line diameter is a very sensitive design parameter and increasing the diameter would result in fuel vapour leaking back out into the atmosphere. Similarly, increasing the back pressure by swapping to a different carbon canister would result in the leakage of fuel vapour. On the other hand, insignificant changes in system behaviour were observed when the fuel pistol angle was changed. 

Place, publisher, year, edition, pages
2019. , p. 60
Keywords [en]
CFD, refuelling, automotive, ORVR, fuel, VOF, volume of fluid, multiphase
National Category
Applied Mechanics Vehicle Engineering
Identifiers
URN: urn:nbn:se:ltu:diva-75410OAI: oai:DiVA.org:ltu-75410DiVA, id: diva2:1340743
External cooperation
Volvo Cars
Subject / course
Student thesis, at least 30 credits
Educational program
Space Engineering, master's level
Supervisors
Examiners
Available from: 2019-09-19 Created: 2019-08-06 Last updated: 2019-09-19Bibliographically approved

Open Access in DiVA

fulltext(21161 kB)16 downloads
File information
File name FULLTEXT01.pdfFile size 21161 kBChecksum SHA-512
f5033a21a92e8c6746f8bdcb9424b7e1b80d2147432f4b14788ad5fe053de50ba44d1f16362f118f506293706dbcc80e931de48ef4e491696f88fced49b90be3
Type fulltextMimetype application/pdf

Search in DiVA

By author/editor
Riström, Anton
By organisation
Space Technology
Applied MechanicsVehicle Engineering

Search outside of DiVA

GoogleGoogle Scholar
Total: 16 downloads
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

urn-nbn

Altmetric score

urn-nbn
Total: 49 hits
CiteExportLink to record
Permanent link

Direct link
Cite
Citation style
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Other style
More styles
Language
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Other locale
More languages
Output format
  • html
  • text
  • asciidoc
  • rtf