Change search
ReferencesLink to record
Permanent link

Direct link
Effektivisering avVerktygshantering i en Part-145
Mälardalen University, School of Innovation, Design and Engineering.
Mälardalen University, School of Innovation, Design and Engineering.
2016 (Swedish)Independent thesis Basic level (university diploma), 10 credits / 15 HE creditsStudent thesis
Abstract [sv]

Denna rapport är ett examensarbete som gjorts av två studenter från Mälardalens högskola i Västerås på akademin Innovation, Design och Teknik. Ett samarbete med gjordes också med Underhållsorganisationen Bromma Air Maintenance.Bromma Air Maintenance (BAM) har i dagsläget verktygslådor som är tilldelade till varje enskild tekniker. Dessa verktygslådor bör kontrolleras och granskas efter varje dag eller arbete. BAM har känt av att detta inte görs ordentligt och har då bestämt sig för att förbättra sina procedurer. BAM har gett oss uppdraget att finna en eller flera lösningar som ska förbättra eller ersätta dem. Skulle BAM fortsätta med sina procedurer så skulle det kunna leda till allvarliga incidenter och haverier då verktygen kan glömmas i flygplanet för att kontroller och granskningar av dessa är svaga.Målet med examensarbetet var att finna bättre och säkrare metoder att tillämpa hos BAM vid verktygshantering av standardverktyg men generellt i en Part-145 organisation. Vi önskade hitta metoder som kunde förbättra den visuella verktygskontrollen där saknade verktyg kunde tydligt noteras. Med hjälp av intervjuer, litteraturstudier och forskningar kring tidigare arbeten, har arbetet lösts och förbättrade procedurer hittats. Önskas en mer ekonomisk metod bör ToolBed användas då appliceringen sker endast inuti verktygslådan. ToolBed erbjuder då en synligare metod som visar att något fattas tack vare de olika färglagren. Skulle en mer säkrare metod önskas, rekommenderas Snap-On Industrials. Denna procedur är mindre ekonomisk men erbjuder ett loggsystem med en kombination

Abstract [en]

This report is a final thesis that was made by two students from Mälardalens Högskola in Västerås from the Academy of Innovation for Design and Technology. A cooperation was also made with the maintenance organization Bromma Air Maintenance.Maintenance of an aircraft is important in the flight industry to insure the continuing airworthiness of an aircraft. This makes it important that a technician performs his work properly. Bromma Air Maintenance, or BAM, have personal toolboxes that are handed out to the technicians. The toolboxes are checked and reviewed after every project or at the end of the day. BAM has felt that their procedures have not been done properly and have then decided to improve them. This gave us the assignment to find one or more solutions that would improve them. There could be serious consequences if BAM would continue with the procedures they use today.The goal of this thesis was to find improved and securer procedures that BAM could use instead of their own. The work is limited to the use of standard tools only in a Part-145 maintenance organization. We wanted to find methods that could improve and simplify the tool inspection visually which would make it clearer when a tool was missing. New procedures where found due with the help of interviews, research and literature studies. If an economic procedure is wanted, ToolBed would be the answer due to its colored layers that indicates greatly when a tool is missing. If a more secure procedure is wanted, the Snap-On industrials system would be recommended. This procedure provides a log system combined with Toolbed and a bar scanner system that logs information when the tools have been taken out and put back inside the toolbox.

Place, publisher, year, edition, pages
2016. , 33 p.
Keyword [sv]
Flygteknik, Underhåll
National Category
Other Engineering and Technologies
Identifiers
URN: urn:nbn:se:mdh:diva-33354OAI: oai:DiVA.org:mdh-33354DiVA: diva2:1033466
External cooperation
Bromma Air Maintenence
Subject / course
Aeronautical Engineering
Supervisors
Available from: 2016-10-24 Created: 2016-10-06 Last updated: 2016-10-24Bibliographically approved

Open Access in DiVA

fulltext(499 kB)6 downloads
File information
File name FULLTEXT01.pdfFile size 499 kBChecksum SHA-512
a25360ffc0a57af49a90dce57743cdb1e57935d73738d8d440d9d649cf4dc4f4556016834b1e46b746ee395c357d5e00fa16bfc24f6d9ec699c868d41409e3fe
Type fulltextMimetype application/pdf

By organisation
School of Innovation, Design and Engineering
Other Engineering and Technologies

Search outside of DiVA

GoogleGoogle Scholar
Total: 6 downloads
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

Total: 8 hits
ReferencesLink to record
Permanent link

Direct link