Change search
ReferencesLink to record
Permanent link

Direct link
Thermal treatment and phase formation in kaolinite and illite based clays from tropical regions of Bolivia
Luleå University of Technology, Department of Engineering Sciences and Mathematics.
Luleå University of Technology, Department of Engineering Sciences and Mathematics, Material Science.
2012 (English)In: 6th EEIGM International Conference Advanced Materials Research: 7th and 8th November, 2011 EEIGM, Nancy, France, Bristol: IOP Publishing Ltd , 2012Conference paper (Refereed)
Abstract [en]

The aim of this study was to compare the thermal behaviour of clays containing illite and kaolinite in various proportions. The clays contained small amounts of K and Fe, which act as fluxing agents. In order to investigate the phase formations during heating, the samples were examined in a differential scanning calorimeter at temperatures up to 1300°C. The thermal expansion of the samples was determined by dilatometer measurements from room temperature up to 1150°C. Phases were identified using x-ray diffraction and scanning electron microscopy. In all samples, most of the kaolinite was transformed into metakaolinite during heating up to 650°C, while illite remained unchanged up to 950°C. There was no influence of K and Fe on dehydroxylation. Metakaolinite formed at temperatures above 950°C leading to a Si-Al spinel. Furthermore, mullite was formed in the temperature interval 1050-1150°C. In this temperature range, the mechanism of mullite formation depended on the amount of K and Fe in the samples, changing the temperature of formation of mullite. It was observed by x-ray diffraction that most of the illite was transformed into a Si-Al spinel phase at 1050°C, and during further heating transformed into mullite. An increased amount of illite in the clays slightly decreased the melting temperature. The dilatometer measurements showed expansion and shrinkage for the dehydroxylation and spinel-phase formation, respectively.

Place, publisher, year, edition, pages
Bristol: IOP Publishing Ltd , 2012.
, I O P Conference Series: Materials Science and Engineering, ISSN 1757-8981 ; 31
Research subject
Engineering Materials
URN: urn:nbn:se:ltu:diva-39476DOI: 10.1088/1757-899X/31/1/012017Local ID: e406eefb-6bbe-4f9e-9c54-39379d112618OAI: diva2:1012989
EEIGM International Conference on Advanced Materials Research : 11/06/2015 - 12/06/2015
Validerad; 2012; Bibliografisk uppgift: Article number 012017; 20111206 (ysko)Available from: 2016-10-03 Created: 2016-10-03Bibliographically approved

Open Access in DiVA

fulltext(139 kB)0 downloads
File information
File name FULLTEXT01.pdfFile size 139 kBChecksum SHA-512
Type fulltextMimetype application/pdf

Other links

Publisher's full text

Search in DiVA

By author/editor
Escalera, EdwinAntti, Marta-LenaOdén, Magnus
By organisation
Department of Engineering Sciences and MathematicsMaterial Science

Search outside of DiVA

GoogleGoogle Scholar
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

Altmetric score

ReferencesLink to record
Permanent link

Direct link