Contact free measurement of complex shapes in the wood industry
2011 (English)In: Mechano-chemical transformations of wood during THM processing: COST Action FP0904 workshop : February, 16-18, 2011, Biel, Switzerland : book of abstracts / [ed] Parviz Navi; Andreas Roth, Biel: Berne University of Applied Sciences , 2011, 143-144 p.Conference paper, Meeting abstract (Refereed)
There is an increasing need to update and correct information about product geometry in the wood manufacturing industry. Changes in machinery or personnel can be the cause of that need. Manual measurement takes time and diff erent ways of digitizing the geometry of the products have therefore been developed.In this study, two methods (3D-coordinate measurement and optical scanning) have been tested together in order to determine the position of a product in relation to the processing machine, and to optically scan the product geometry. The aim was to identify and evaluate methods to digitize product geometry into a CAD-model for the wood industry. Th e seat shell measured was fitted in the CNC-machine where the processing later would be performed.The methodology used has made it possible to create a CAD-model from the physical model. Based on the experience from this methodology, it would be recommended to continue by creating of a tool that minimizes the need for after processing, i.e. the adjustment of certain coordinates manually.
Place, publisher, year, edition, pages
Biel: Berne University of Applied Sciences , 2011. 143-144 p.
IdentifiersURN: urn:nbn:se:ltu:diva-27142Local ID: 07c2df63-ba3a-4cfe-998b-a5fa9d27c48dISBN: 978-3-9523787-0-0OAI: oai:DiVA.org:ltu-27142DiVA: diva2:1000323
COST Action FP0904 Workshop : Mechano-chemical transformations of wood during thermo-hydral-mechanical processes 16/02/2011 - 18/02/2011
Upprättat; 2011; 20130911 (ysko)2016-09-302016-09-30