Ändra sökning
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Uncertainty and correlation analysis of lead nuclear data on reactor parameters for the European Lead Cooled Training Reactor
Uppsala universitet, Teknisk-naturvetenskapliga vetenskapsområdet, Fysiska sektionen, Institutionen för fysik och astronomi, Tillämpad kärnfysik. (Nuclear Research Group)
Uppsala universitet, Teknisk-naturvetenskapliga vetenskapsområdet, Fysiska sektionen, Institutionen för fysik och astronomi, Tillämpad kärnfysik. (Nuclear Reactions Group)
Uppsala universitet, Teknisk-naturvetenskapliga vetenskapsområdet, Fysiska sektionen, Institutionen för fysik och astronomi, Tillämpad kärnfysik. (Nuclear Reactions Group)
Uppsala universitet, Teknisk-naturvetenskapliga vetenskapsområdet, Fysiska sektionen, Institutionen för fysik och astronomi, Tillämpad kärnfysik. (Nuclear Research and Consultancy Group)
Visa övriga samt affilieringar
2015 (Engelska)Ingår i: Annals of Nuclear Energy, ISSN 0306-4549, E-ISSN 1873-2100, Vol. 75, s. 26-37Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

The Total Monte Carlo (TMC) method was used in this study to assess the impact of Pb-204, 206, 207, 208 nuclear data uncertainties on reactor safety parameters for the ELECTRA reactor. Relatively large uncertainties were observed in the k-eff and the coolant void worth (CVW) for all isotopes except for Pb-204 with signicant contribution coming from Pb-208 nuclear data; the dominant eectcame from uncertainties in the resonance parameters; however, elastic scattering cross section and the angular distributions also had signicant impact. It was also observed that the k-eff distribution for Pb-206, 207, 208 deviates from a Gaussian distribution with tails in the high k-eff region. An uncertainty of 0.9% on the k-eff and 3.3% for the CVW due to lead nuclear data were obtained. As part of the work, cross section-reactor parameter correlations were also studied using a Monte Carlo sensitivity method. Strong correlations were observed between the k-eff and (n,el) cross section for all the lead isotopes. The correlation between the (n,inl) and the k-eff was also found to be signicant.

Ort, förlag, år, upplaga, sidor
2015. Vol. 75, s. 26-37
Nyckelord [en]
TMC, nuclear data uncertainty, lead isotopes, safety parameters, ELECTRA, fuel cycle
Nationell ämneskategori
Subatomär fysik
Forskningsämne
Tillämpad kärnfysik
Identifikatorer
URN: urn:nbn:se:uu:diva-224524DOI: 10.1016/j.anucene.2014.07.043ISI: 000347493400004OAI: oai:DiVA.org:uu-224524DiVA, id: diva2:717027
Projekt
GENIUS projectTillgänglig från: 2014-05-13 Skapad: 2014-05-13 Senast uppdaterad: 2017-12-05Bibliografiskt granskad
Ingår i avhandling
1. Nuclear data uncertainty propagation for a lead-cooled fast reactor: Combining TMC with criticality benchmarks for improved accuracy
Öppna denna publikation i ny flik eller fönster >>Nuclear data uncertainty propagation for a lead-cooled fast reactor: Combining TMC with criticality benchmarks for improved accuracy
2014 (Engelska)Licentiatavhandling, sammanläggning (Övrigt vetenskapligt)
Abstract [en]

For the successful deployment of advanced nuclear systems and for optimization of current reactor designs, high quality and accurate nuclear data are required. Before nuclear data can be used in applications, they are first evaluated, benchmarked against integral experiments and then converted into formats usable for applications. The evaluation process in the past was usually done by using differential experimental data which was then complimented with nuclear model calculations. This trend is fast changing because of increase in computational power and tremendous improvements in nuclear reaction theories over the last decade. Since these model codes are not perfect, they are usually validated against a large set of experimental data. However, since these experiments are themselves not exact, the calculated quantities of model codes such as cross sections, angular distributions etc., contain uncertainties. A major source of uncertainty being the input parameters to these model codes. Since nuclear data are used in reactor transport codes asinput for simulations, the output of transport codes ultimately contain uncertainties due to these data. Quantifying these uncertainties is therefore important for reactor safety assessment and also for deciding where additional efforts could be taken to reduce further, these uncertainties.

Until recently, these uncertainties were mostly propagated using the generalized perturbation theory. With the increase in computational power however, more exact methods based on Monte Carlo are now possible. In the Nuclear Research and Consultancy Group (NRG), Petten, the Netherlands, a new method called ’Total Monte carlo (TMC)’ has been developed for nuclear data evaluation and uncertainty propagation. An advantage of this approach is that, it eliminates the use of covariances and the assumption of linearity that is used in the perturbation approach.

In this work, we have applied the TMC methodology for assessing the impact of nuclear data uncertainties on reactor macroscopic parameters of the European Lead Cooled Training Reactor (ELECTRA). ELECTRA has been proposed within the GEN-IV initiative within Sweden. As part of the work, the uncertainties of plutonium isotopes and americium within the fuel, uncertainties of the lead isotopes within the coolant and some structural materials of importance have been investigated at the beginning of life. For the actinides, large uncertainties were observed in the k-eff due to Pu-238, 239, 240 nuclear data while for the lead coolant, the uncertainty in the k-eff for all the lead isotopes except for Pb-204 were large with significant contribution coming from Pb-208. The dominant contributions to the uncertainty in the k-eff came from uncertainties in the resonance parameters for Pb-208.

Also, before the final product of an evaluation is released, evaluated data are tested against a large set of integral benchmark experiments. Since these benchmarks differ in geometry, type, material composition and neutron spectrum, their selection for specific applications is normally tedious and not straight forward. As a further objective in this thesis, methodologies for benchmark selection based the TMC method have been developed. This method has also been applied for nuclear data uncertainty reduction using integral benchmarks. From the results obtained, it was observed that by including criticality benchmark experiment information using a binary accept/reject method, a 40% and 20% reduction in nuclear data uncertainty in the k-eff was achieved for Pu-239 and Pu-240 respectively for ELECTRA.

Ort, förlag, år, upplaga, sidor
Uppsala universitet, 2014. s. 100
Nationell ämneskategori
Annan fysik
Forskningsämne
Tillämpad kärnfysik
Identifikatorer
urn:nbn:se:uu:diva-224687 (URN)
Opponent
Handledare
Tillgänglig från: 2014-05-23 Skapad: 2014-05-17 Senast uppdaterad: 2014-05-23Bibliografiskt granskad
2. Nuclear data uncertainty quantification and data assimilation for a lead-cooled fast reactor: Using integral experiments for improved accuracy
Öppna denna publikation i ny flik eller fönster >>Nuclear data uncertainty quantification and data assimilation for a lead-cooled fast reactor: Using integral experiments for improved accuracy
2015 (Engelska)Doktorsavhandling, sammanläggning (Övrigt vetenskapligt)
Abstract [en]

For the successful deployment of advanced nuclear systems and optimization of current reactor designs, high quality nuclear data are required. Before nuclear data can be used in applications they must first be evaluated, tested and validated against a set of integral experiments, and then converted into formats usable for applications. The evaluation process in the past was usually done by using differential experimental data which was then complemented with nuclear model calculations. This trend is fast changing due to the increase in computational power and tremendous improvements in nuclear reaction models over the last decade. Since these models have uncertain inputs, they are normally calibrated using experimental data. However, these experiments are themselves not exact. Therefore, the calculated quantities of model codes such as cross sections and angular distributions contain uncertainties. Since nuclear data are used in reactor transport codes as input for simulations, the output of transport codes contain uncertainties due to these data as well. Quantifying these uncertainties is important for setting safety margins; for providing confidence in the interpretation of results; and for deciding where additional efforts are needed to reduce these uncertainties. Also, regulatory bodies are now moving away from conservative evaluations to best estimate calculations that are accompanied by uncertainty evaluations.

In this work, the Total Monte Carlo (TMC) method was applied to study the impact of nuclear data uncertainties from basic physics to macroscopic reactor parameters for the European Lead Cooled Training Reactor (ELECTRA). As part of the work, nuclear data uncertainties of actinides in the fuel, lead isotopes within the coolant, and some structural materials have been investigated. In the case of the lead coolant it was observed that the uncertainty in the keff and the coolant void worth (except in the case of 204Pb), were large, with the most significant contribution coming from 208Pb. New 208Pb and 206Pb random nuclear data libraries with realistic central values have been produced as part of this work. Also, a correlation based sensitivity method was used in this work, to determine parameter - cross section correlations for different isotopes and energy groups.

Furthermore, an accept/reject method and a method of assigning file weights based on the likelihood function are proposed for uncertainty reduction using criticality benchmark experiments within the TMC method. It was observed from the study that a significant reduction in nuclear data uncertainty was obtained for some isotopes for ELECTRA after incorporating integral benchmark information. As a further objective of this thesis, a method for selecting benchmark for code validation for specific reactor applications was developed and applied to the ELECTRA reactor. Finally, a method for combining differential experiments and integral benchmark data for nuclear data adjustments is proposed and applied for the adjustment of neutron induced 208Pb nuclear data in the fast energy region.

Ort, förlag, år, upplaga, sidor
Uppsala: Acta Universitatis Upsaliensis, 2015. s. 85
Serie
Digital Comprehensive Summaries of Uppsala Dissertations from the Faculty of Science and Technology, ISSN 1651-6214 ; 1315
Nyckelord
Total Monte Carlo, ELECTRA, nuclear data, uncertainty propagation, integral experiments, nuclear data adjustment, uncertainty reduction
Nationell ämneskategori
Subatomär fysik
Identifikatorer
urn:nbn:se:uu:diva-265502 (URN)978-91-554-9407-0 (ISBN)
Disputation
2015-12-17, polhemsalen, Ångströmlaboratoriet, Lägerhyddsvägen 1, Uppsala, 09:15 (Engelska)
Opponent
Handledare
Tillgänglig från: 2015-11-24 Skapad: 2015-10-30 Senast uppdaterad: 2016-01-13

Open Access i DiVA

fulltext(6871 kB)560 nedladdningar
Filinformation
Filnamn FULLTEXT01.pdfFilstorlek 6871 kBChecksumma SHA-512
f41d8e7b4b1b6648cacfe2412340aade58f3b34103f2fcf710bf89a91f7fd550c8740e6981ff0c7f3756d3640658b9e2e64f566cc1ad244cb5bd66ac2f068979
Typ fulltextMimetyp application/pdf

Övriga länkar

Förlagets fulltext

Sök vidare i DiVA

Av författaren/redaktören
Alhassan, ErwinSjöstrand, HenrikHelgesson, PetterArjan, J. KoningÖsterlund, MichaelPomp, Stephan
Av organisationen
Tillämpad kärnfysik
I samma tidskrift
Annals of Nuclear Energy
Subatomär fysik

Sök vidare utanför DiVA

GoogleGoogle Scholar
Totalt: 560 nedladdningar
Antalet nedladdningar är summan av nedladdningar för alla fulltexter. Det kan inkludera t.ex tidigare versioner som nu inte längre är tillgängliga.

doi
urn-nbn

Altmetricpoäng

doi
urn-nbn
Totalt: 1538 träffar
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf