Wear is a significant challenge encountered in the mining industry, affecting the durability and performance of materials. Hadfield steel has emerged as a commonly used material in this field due to its favorable properties. However, there is a persistent need to enhance its service life. Metal matrix composites (MMCs) offer a potential solution to address this issue. By reinforcingHadfield steel with ceramic particles, MMCs aim to improve the material's wear resistance and extend its operational lifespan. This study specifically investigates the potential of MMCs, reinforced with Zirconia Toughened Alumina (ZTA) particles, to enhance the performance of Hadfield steel in mining applications. Notably, ZTA particles are chosen for their exceptional wear resistance and low cost, making them an attractive reinforcement option. The mechanical behavior and properties of ZTA particle reinforced metal matrix composites (MMCs) were thoroughly investigated by conducting a comprehensive analysis. This analysis encompassed adetailed examination of the microstructure, composition, distribution, as well as the bonding between ZTA particles and the metallic matrix, along with rigorous measurements of hardness and wear resistance. The findings of the study reveal that the ZTA particle reinforced MMCs exhibit a uniform dispersion of ZTA particles throughout the composite material. This homogeneous distribution contributes to notable enhancements in the average hardness of the MMCs, surpassing that of Hadfield steel alone. However, the study did not observe a substantial enhancement in the wear resistance of the material.