Endre søk
RefereraExporteraLink to record
Permanent link

Direct link
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annet format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annet språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
The influence of tool steel microstructure on galling
Karlstad university, Karlstad, Sweden.ORCID-id: 0000-0002-8144-8821
2014 (engelsk)Doktoravhandling, med artikler (Annet vitenskapelig)
Abstract [en]

In sheet metal forming (SMF) of materials such as stainless steels there is a major problem with transfer and accumulation of sheet material to the metal forming tool surface. The problem is known as galling; a sort of severe adhesive wear, which results in severe scratching of produced parts. In this thesis, the overall aim was to gain knowledge of the influence of tool steel microstructure on galling initiation under sliding conditions. It was discovered that material transfer and tool steel damage caused by sheet material flow creating wear-induced galling initiation sites occurred in the early stage of galling. The galling resistance was higher for tool steels with higher matrix hardness due to better resistance to tool steel damage. Initial friction and critical contact pressure to galling was influenced by the strength of the sheet material. Material transfer happened at low pressures and the friction value was high in a case of sheet materials with lower proof strength, possibly due to the sheet contact against the tool steel matrix resulting in high adhesion and quicker tool damage. It was demonstrated that, in addition to hardness of the tool steel matrix and sheet material proof strength, tool steel microstructural features like size, shape, distribution and height of hard phases are important parameters influencing galling. Tool steels comprising homogeneously distributed, small and high hard phases better prevented the contact between sheet material and the tool steel matrix. Thus, a metal to metal contact with high friction was more efficiently avoided, which resulted in better tool performance.

 

sted, utgiver, år, opplag, sider
Karlstad: Karlstads universitet , 2014. , s. 42
Serie
Karlstad University Studies, ISSN 1403-8099 ; 2014:35
Emneord [en]
Galling, Microstructure, Material transfer, Tool steel, Stainless steel, Metall transfer
HSV kategori
Forskningsprogram
Materialteknik
Identifikatorer
URN: urn:nbn:se:oru:diva-61013ISBN: 978-91-7063-568-7 (tryckt)OAI: oai:DiVA.org:oru-61013DiVA, id: diva2:1141231
Disputas
2014-08-29, Ljungbergsalen, 21A 244, Universitetsgatan 2, 10:15 (engelsk)
Opponent
Veileder
Tilgjengelig fra: 2017-09-21 Laget: 2017-09-14 Sist oppdatert: 2018-06-25bibliografisk kontrollert

Open Access i DiVA

fulltekst(2610 kB)289 nedlastinger
Filinformasjon
Fil FULLTEXT01.pdfFilstørrelse 2610 kBChecksum SHA-512
0bc4d47333c54bc4a2901470adde4b82951dd950697d24f3217e3668b782b0ced088ccb9061656c18550ff42868058bec8ba7d838a8175f01e34474352cd0c76
Type fulltextMimetype application/pdf

Søk i DiVA

Av forfatter/redaktør
Karlsson, Patrik

Søk utenfor DiVA

GoogleGoogle Scholar
Totalt: 289 nedlastinger
Antall nedlastinger er summen av alle nedlastinger av alle fulltekster. Det kan for eksempel være tidligere versjoner som er ikke lenger tilgjengelige

isbn
urn-nbn

Altmetric

isbn
urn-nbn
Totalt: 395 treff
RefereraExporteraLink to record
Permanent link

Direct link
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annet format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annet språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf