Endre søk
RefereraExporteraLink to record
Permanent link

Direct link
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annet format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annet språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Modeling of Cold Pilgering of Tubes
Högskolan Dalarna, Akademin Industri och samhälle, Materialteknik. Luleå University of Technology.
2017 (engelsk)Licentiatavhandling, med artikler (Annet vitenskapelig)
Abstract [en]

Cold pilgering is a challenging tube forming process in terms of modeling due to the complexity in kinematic of tools, friction condition and material behavior. The process development has mostly been based on simple formulas and costly full-scale tryouts. The aim in this study is to develop validated Finite element models of cold pilgering to increase the understanding of influence of the process parameters on the produced tubes.

In the course of this thesis, three-dimensional mechanical and thermo-mechanical Finite element models of cold pilgering were developed. The commercial code MSC.Marc was used in the simulations. General 3D models are needed to be able to capture asymmetric deformation in cold pilgering. It was found that tool deflections together with elastic deformation of roll dies have considerable influence on the rolling force. Furthermore, the strain rate and temperature effects on the response of the material and thereby on the rolling force were evaluated.

sted, utgiver, år, opplag, sider
Luleå: Luleå University of Technology , 2017.
Serie
Licentiate thesis, ISSN 1402-1757
Emneord [en]
Cold pilgering, finite element method, tube forming, tool elasticity, roll flattening
HSV kategori
Forskningsprogram
Stålformning och ytteknik
Identifikatorer
URN: urn:nbn:se:du-25902ISBN: 978-91-7583-873-1 (digital)ISBN: 978-91-7583-872-4 (tryckt)OAI: oai:DiVA.org:du-25902DiVA, id: diva2:1136747
Presentation
2017-05-31, E130, Luleå tekniska universitet, Luleå, 10:25 (engelsk)
Opponent
Veileder
Tilgjengelig fra: 2017-08-29 Laget: 2017-08-29 Sist oppdatert: 2017-08-29bibliografisk kontrollert
Delarbeid
1. Finite element modelling of cold pilgering of tubes
Åpne denne publikasjonen i ny fane eller vindu >>Finite element modelling of cold pilgering of tubes
2015 (engelsk)Inngår i: Proceedings of the 8th International Conference on Computational Plasticity - Fundamentals and Applications, COMPLAS 2015, 2015, s. 716-726Konferansepaper, Publicerat paper (Fagfellevurdert)
Abstract [en]

Cold pilgering is a cold forming process used during manufacturing of seamless tubes. The tube with a mandrel inside is fed forward and rotated in stepwise increments, while the roll stand moves back and forth. The total plastic deformation of the tube is such that the cross-sectional area of the tube decreases and the length of the tube increases during the process. However, this is performed in many small incremental steps, where the direction of deformation in a material point changes at each stroke. Most published models of cold pilgering use simplified material models. In reality, the flow stress is dependent on temperature, strain rate, strain history and microstructure. In this work, temperature and strain rate distributions are computed, using a 3D thermo-mechanical FE model, and the influence of temperature and strain rate on the rolling force is investigated. The Johnson-Cook model is employed to describe the flow stress using isotropic hardening. The results show that strain rate and temperature have a significant influence on the roll separation force.

Emneord
Cold forming, Cold pilgering, Finite element analysis, Johnson-cook, Seamless tubes, Thermo-mechanical analysis, Von mises plasticity, Finite element method, Plastic flow, Plasticity, Tubes (components), Tubing, Pilgering, Von-Mises plasticity, Strain rate
HSV kategori
Forskningsprogram
Stålformning och ytteknik
Identifikatorer
urn:nbn:se:du-21303 (URN)000380573600069 ()2-s2.0-84992261190 (Scopus ID)9788494424465 (ISBN)
Konferanse
13th International Conference on Computational Plasticity, COMPLAS 2015, 1 September 2015 through 3 September 2015
Tilgjengelig fra: 2016-03-31 Laget: 2016-03-31 Sist oppdatert: 2017-08-29bibliografisk kontrollert
2. Finite element modeling of tube deformation during cold pilgering
Åpne denne publikasjonen i ny fane eller vindu >>Finite element modeling of tube deformation during cold pilgering
2016 (engelsk)Inngår i: MATEC Web of Conferences, 2016, Vol. 80, artikkel-id 15004Konferansepaper, Publicerat paper (Fagfellevurdert)
Abstract [en]

A three-dimensional finite element model of cold pilgering of stainless steel tubes is developed in this paper. The objective is to use the model to increase the understanding of forces and deformations in the process. The focus is on the influence of vertical displacements of the roll stand and axial displacements of the mandrel and tube. Therefore, the rigid tools and the tube are supported with elastic springs. Additionally, the influences of friction coefficients in the tube/mandrel and tube/roll interfaces are examined. A sensitivity study is performed to investigate the influences of these parameters on the strain path and the roll separation force. The results show the importance of accounting for the displacements of the tube and rigid tools on the roll separation force and the accumulative plastic strain.

Serie
MATEC Web of Conferences, E-ISSN 2261-236X
Emneord
cold forming
HSV kategori
Forskningsprogram
Stålformning och ytteknik
Identifikatorer
urn:nbn:se:du-23429 (URN)10.1051/matecconf/20168015004 (DOI)000392331100086 ()
Konferanse
NUMIFORM 2016: The 12th International Conference on Numerical Methods in Industrial Forming Processes
Tilgjengelig fra: 2016-11-21 Laget: 2016-11-21 Sist oppdatert: 2017-08-29bibliografisk kontrollert
3. Finite element analysis of cold pilgering using elastic roll dies
Åpne denne publikasjonen i ny fane eller vindu >>Finite element analysis of cold pilgering using elastic roll dies
2017 (engelsk)Konferansepaper, Publicerat paper (Fagfellevurdert)
Abstract [en]

A finite element model of cold pilgering with elastic roll dies have been developed and used to investigate the influence of roll die deformation on the material flow, contact region, roll separating force and tube dimensions. Full scale experiments were performed to validate the contact surface and tube dimensions. The results show that the influence of roll die flattening is not significant on the contact length. However, elastic deformation of roll die has strong influence on both the wall thickness reduction and roll separating force. Thus it is recommended to consider elasticity of roll dies when forces and tube dimensions are estimated.

sted, utgiver, år, opplag, sider
Elsevier, 2017
Serie
Procedia Engineering, ISSN 1877-7058 ; 2017
Emneord
cold pilgering; cold forming; tube forming; roll flattening; contact length; roll separating force; finite element method; tool elasticity; tube dimension
HSV kategori
Forskningsprogram
Stålformning och ytteknik
Identifikatorer
urn:nbn:se:du-25901 (URN)10.1016/j.proeng.2017.10.1010 (DOI)
Konferanse
International Conference on the Technology of Plasticity, ICTP 2017, Cambridge, United Kingdom, 17-22 September 2017
Tilgjengelig fra: 2017-08-29 Laget: 2017-08-29 Sist oppdatert: 2017-12-18bibliografisk kontrollert

Open Access i DiVA

fulltext(6714 kB)82 nedlastinger
Filinformasjon
Fil FULLTEXT01.pdfFilstørrelse 6714 kBChecksum SHA-512
9a7b605497f45ec18b92c27be1ac3c64f6ee68708522287cf75f14356030127b8c7d448685aa18d1e837d16fa997dfb4df1239adba6c8a0725621afff7a57183
Type fulltextMimetype application/pdf

Søk i DiVA

Av forfatter/redaktør
Azizoğlu, Yağız
Av organisasjonen

Søk utenfor DiVA

GoogleGoogle Scholar
Totalt: 82 nedlastinger
Antall nedlastinger er summen av alle nedlastinger av alle fulltekster. Det kan for eksempel være tidligere versjoner som er ikke lenger tilgjengelige

isbn
urn-nbn

Altmetric

isbn
urn-nbn
Totalt: 924 treff
RefereraExporteraLink to record
Permanent link

Direct link
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annet format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annet språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf