Paper-reinforced plastics are gaining increased interest as packaging materials, where mechanical properties are of great importance. Strength and stress transfer in paper sheets are controlled by fibre-fibre bonds. In paper-reinforced plastics, where the sheet is impregnated with a polymer resin, other stress-transfer mechanisms may be more important. The influence of fibre-fibre bonds on the strength of paper-reinforced plastics was therefore investigated. Paper sheets with different degrees of fibre-fibre bonding were manufactured and used as reinforcement in a polymeric matrix. Image analysis tools were used to verify that the difference in the degree of fibre-fibre bonding had been preserved in the composite materials. Strength and stiffness of the composites were experimentally determined and showed no correlation to the degree of fibre-fibre bonding, in contrast to the behaviour of unimpregnated paper sheets. The degree of fibre-fibre bonding is therefore believed to have little importance in this type of material, where stress is mainly transferred through the fibre-matrix interface.