Digitala Vetenskapliga Arkivet

Change search
CiteExportLink to record
Permanent link

Direct link
Cite
Citation style
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Other style
More styles
Language
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Other locale
More languages
Output format
  • html
  • text
  • asciidoc
  • rtf
Properties of laser hybrid butt welds of 420 MPa steel
SINTEF, Trondheim.
Luleå University of Technology, Department of Engineering Sciences and Mathematics, Product and Production Development.
SINTEF, Trondheim.
Kværner Verdal.
Show others and affiliations
2013 (English)In: The proceedings of the Twenty-third (2013) International Offshore and Polar Engineering Conference: Anchorage, Alaska, June 30-July 5, 2013 : ISOPE-2013 Anchorage / [ed] Jin S. Chung, Cupertino, Calif.: International Society of Offshore and Polar Engineers , 2013, p. 290-294Conference paper, Published paper (Refereed)
Abstract [en]

Laser hybrid welding has been used in European shipbuilding for many years due to its high productivity. In order to qualify the process for the oil and gas industry, an extensive welding and testing programme is needed, and the properties must satisfy more severe requirements than in shipbuilding. This is particularly the case when these activities are moving to the Arctic regions, where low temperature toughness may be the primary challenge. The present investigation addressed preliminary welding trials carried out with 15 kW fibre laser-gas metal arc (GMA) hybrid welding using double Y joint of 20 mm thick 420 MPa steel plates. Both Charpy V notch impact and CTOD fracture mechanical testing were included with test temperature of -30°C. The results indicate that the heat affected zone (HAZ) of the examined steel appeared with satisfactory toughness (> 200 J, > 0.2 mm) while the employed weld metal had insufficient impact properties. The weld metal CTOD toughness approached 0.2 mm. With a better welding wire, designed for low temperature applications, it is reasonable to suggest that laser hybrid arc welding can be used for applications even below -30 to -40°C

Place, publisher, year, edition, pages
Cupertino, Calif.: International Society of Offshore and Polar Engineers , 2013. p. 290-294
National Category
Manufacturing, Surface and Joining Technology
Research subject
Manufacturing Systems Engineering
Identifiers
URN: urn:nbn:se:ltu:diva-28262Local ID: 2010a98a-ee73-45be-8932-b673bdaad5fcISBN: 9781880653999 (print)OAI: oai:DiVA.org:ltu-28262DiVA, id: diva2:1001457
Conference
International Offshore and Polar Engineering Conference : 30/05/2013 - 05/06/2013
Note
Godkänd; 2013; 20130924 (andbra)Available from: 2016-09-30 Created: 2016-09-30 Last updated: 2017-11-25Bibliographically approved

Open Access in DiVA

No full text in DiVA

Search in DiVA

By author/editor
Wiklund, GregerKaplan, Alexander
By organisation
Product and Production Development
Manufacturing, Surface and Joining Technology

Search outside of DiVA

GoogleGoogle Scholar

isbn
urn-nbn

Altmetric score

isbn
urn-nbn
Total: 633 hits
CiteExportLink to record
Permanent link

Direct link
Cite
Citation style
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Other style
More styles
Language
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Other locale
More languages
Output format
  • html
  • text
  • asciidoc
  • rtf