Ändra sökning
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Transmission and dissipation of stress wave energy at a percussive drill rod joint
Luleå tekniska universitet.
1987 (Engelska)Ingår i: International Journal of Impact Engineering, ISSN 0734-743X, E-ISSN 1879-3509, Vol. 6, nr 3, s. 157-173Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

Transmission and dissipation of stress wave energy at a percussive drill rod joint is determined for three joint types, three joint preload levels, three hammer lengths ( incident wave lengths) and a range of impact velocities ( incident wave amplitudes). The energies of the incident, reflected and transmitted waves are evaluated from measured strains, and then the dissipated energy is determined as the deficit of energy in the two latter waves compared with the first. The accuracy needed is obtained by introducing a compensation factor and determining its value from the requirement of momentum conservation. The experimental results for threaded standard joints are compared with experimental results for threadless dummy joints, made in one piece, and also with theoretical results. The latter are based on one model which represents the joint as a well on a one- dimensional elastic rod (characteristics impedance or CI model) and on another model which represents the joint as a rigid mass between one-dimensional elastic rods (rigid mass or RM model). For the joints 70-100% of the incident wave energy is transmitted and 0-20% is dissipated. The corresponding figures for the dummies are 90-100% and (±)1%, repectively. The latter figure indicates the inaccuracy in the measurement and evaluation procedures. The two models agree fairly well with the dummies. Under certain conditions they also give reasonably accurate predictions for the energy transmitted through a joint. As they sometimes give quite inaccurate results for energy transmission and furthermore fail to predict energy dissipation they need be refined.

Ort, förlag, år, upplaga, sidor
1987. Vol. 6, nr 3, s. 157-173
Nationell ämneskategori
Teknisk mekanik
Forskningsämne
Hållfasthetslära
Identifikatorer
URN: urn:nbn:se:ltu:diva-10039DOI: 10.1016/0734-743X(87)90019-4Scopus ID: 2-s2.0-0023561492Lokalt ID: 8cc5e140-259b-11dd-9e62-000ea68e967bOAI: oai:DiVA.org:ltu-10039DiVA, id: diva2:982979
Anmärkning
Godkänd; 1987; 20080519 (cira)Tillgänglig från: 2016-09-29 Skapad: 2016-09-29 Senast uppdaterad: 2018-07-10Bibliografiskt granskad

Open Access i DiVA

Fulltext saknas i DiVA

Övriga länkar

Förlagets fulltextScopus
I samma tidskrift
International Journal of Impact Engineering
Teknisk mekanik

Sök vidare utanför DiVA

GoogleGoogle Scholar

doi
urn-nbn

Altmetricpoäng

doi
urn-nbn
Totalt: 72 träffar
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf