Digitala Vetenskapliga Arkivet

Ändra sökning
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Simulation of thermal stresses in a disc brake
Högskolan i Jönköping, Tekniska Högskolan, JTH. Forskningsmiljö Produktutveckling - Simulering och optimering.
Högskolan i Jönköping, Tekniska Högskolan, JTH. Forskningsmiljö Produktutveckling - Simulering och optimering.
2012 (Engelska)Självständigt arbete på avancerad nivå (masterexamen), 20 poäng / 30 hpStudentuppsats (Examensarbete)
Abstract [en]

The heat flux produced from the friction between a disc and pad system leads to a high temperature which causes thermal stresses in the disc and after a number of repeated braking cycles, cracks might be initiated. The finite element analysis (FEA) is performed to determine the temperatures profile in the disc and to analyze the stresses for the repeated braking, which could be used to calculate the fatigue life of a disc.Sequentially coupled approach is used for thermo-mechanical problem and the problem is divided into two parts, heat analysis and thermal stress analysis. The heat analysis is obtained by including frictional heat and adopting an Eulerian approach. The heat analysis is conducted by using Abaqus and the toolbox developed by Niclas Strömberg. The thermal stress analysis, which is the main focus of this thesis, is followed using Abaqus. The plasticity theory as background for stress analysis is discussed in detail. The rate independent elasto-plastic plasticity is used in the stress analysis. Temperature independent material properties are considered throughout the thesis work.Isotropic, kinematic and combined hardening models are analyzed for simple 2D academic models for different types of cyclic loads. A benchmark disc and pad model, which is less complicated than the real disc-pad model, is also studied. The linear kinematic hardening model with rate independent elastic-plastic plasticity is used for benchmark and real disc-pad model. The results of the benchmark model and the real model are observed to be similar in terms of plasticity theory.

Ort, förlag, år, upplaga, sidor
2012. , s. 56
Nyckelord [en]
DISC BRAKE, ABAQUS, FATIGUE ANALYSIS, PLASTICITY, FLOW RULE, HARDENING, STRESS AND STAIN ANANLYSIS
Nationell ämneskategori
Teknisk mekanik
Identifikatorer
URN: urn:nbn:se:hj:diva-19163OAI: oai:DiVA.org:hj-19163DiVA, id: diva2:544330
Ämne / kurs
JTH, Produktutveckling
Uppsök
teknik
Handledare
Examinatorer
Tillgänglig från: 2012-09-06 Skapad: 2012-08-14 Senast uppdaterad: 2012-09-06Bibliografiskt granskad

Open Access i DiVA

fulltext(5061 kB)26842 nedladdningar
Filinformation
Filnamn FULLTEXT03.pdfFilstorlek 5061 kBChecksumma SHA-512
1c098290519dafa82a8d1732c9e07c623c358b1abfabe5dd77802d619f55050ea44c40a72f56435ac75a980dbae2826c8448cef2a1e8e0acaa110d1e8d3135bf
Typ fulltextMimetyp application/pdf

Av organisationen
JTH. Forskningsmiljö Produktutveckling - Simulering och optimering
Teknisk mekanik

Sök vidare utanför DiVA

GoogleGoogle Scholar
Totalt: 26894 nedladdningar
Antalet nedladdningar är summan av nedladdningar för alla fulltexter. Det kan inkludera t.ex tidigare versioner som nu inte längre är tillgängliga.

urn-nbn

Altmetricpoäng

urn-nbn
Totalt: 1284 träffar
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf