Ändra sökning
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
On-Engine Turbocharger Performance Considering Heat Transfer
KTH, Skolan för industriell teknik och management (ITM), Maskinkonstruktion (Inst.). (Förbränningsmotorteknik, Internal Combustion Engines)
2012 (Engelska)Licentiatavhandling, sammanläggning (Övrigt vetenskapligt)
Abstract [en]

Heat transfer plays an important role in affecting an on-engine turbocharger performance. However, it is normally not taken into account for turbocharged engine simulations.

Generally, an engine simulation based on one-dimensional gas dynamics uses turbocharger performance maps which are measured without quantifying and qualifying the heat transfer, regardless of the fact that they are measured on the hot-flow or cold-flow gas-stand. Since heat transfer situations vary for on-engine turbochargers, the maps have to be shifted and corrected in the 1-D engine simulation, which mass and efficiency multipliers usually do for both the turbine and the compressor. The multipliers change the maps and are often different for every load point. Particularly, the efficiency multiplier is different for every heat transfer situation on the turbocharger. The heat transfer leads to a deviation from turbocharger performance maps, and increased complexity of the turbocharged engine simulation. Turbochargers operate under different heat transfer situations while they are installed on the engines.

The main objectives of this thesis are:

  • heat transfer modeling of a turbocharger to quantify and qualify heat transfer mechanisms,
  • improving turbocharged engine simulation by including heat transfer in the turbocharger,
  • assessing the use of two different turbocharger performance maps concerning the heat transfer situation (cold-measured and hot-measured turbocharger performance maps) in the simulation of a measured turbocharged engine,
  • prediction of turbocharger walls’ temperatures and their effects on the turbocharger performance on different heat transfer situations.

Experimental investigation has been performed on a water-oil-cooled turbocharger, which was installed on a 2-liter GDI engine for different load points of the engine and different heat transfer situations on the turbocharger by using insulators, an extra cooling fan, radiation shields and water-cooling settings. In addition, several thermocouples have been used on accessible surfaces of the turbocharger to calculate external heat transfers.

Based on the heat transfer analysis of the turbocharger, the internal heat transfer from the bearing housing to the compressor significantly affects the compressor. However, the internal heat transfer from the turbine to the bearing housing and the external heat transfer of the turbine housing mainly influence the turbine. The external heat transfers of the compressor housing and the bearing housing, and the frictional power do not play an important role in the heat transfer analysis of the turbocharger.

The effect of the extra cooling fan on the energy balance of the turbocharger is significant. However, the effect of the water is more significant on the external heat transfer of the bearing housing and the internal heat transfer from the bearing housing to the compressor. It seems the radiation shield between the turbine and the compressor has no significant effect on the energy balance of the turbocharger.

The present study shows that the heat transfer in the turbocharger is very crucial to take into account in the engine simulations. This improves simulation predictability in terms of getting the compressor efficiency multiplier equal to one and turbine efficiency multiplier closer to one, and achieving turbine outlet temperature close to the measurement. Moreover, the compressor outlet temperature becomes equal to the measurement without correcting the map.

The heat transfer situation during the measurement of the turbocharger performance influences the amount of simulated heat flow to the compressor. The heat transfer situation may be defined by the turbine inlet temperature, oil heat flux and water heat flux. However, the heat transfer situation on the turbine makes a difference on the required turbine efficiency multiplier, rather than the amount of turbine heat flow. It seems the turbine heat flow is a stronger function of available energy into the turbine. Of great interest is the fact that different heat situations on the turbocharger do not considerably influence the pressure ratio of the compressor. The turbine and compressor efficiencies are the most important parameters that are affected by that.

The component temperatures of the turbocharger influence the working fluid temperatures. Additionally, the turbocharger wall temperatures are predictable from the experiment. This prediction enables increased precision in engine simulations for future works in transient operations.

Ort, förlag, år, upplaga, sidor
Stockholm: KTH Royal Institute of Technology, 2012. , s. 105
Serie
Trita-MMK, ISSN 1400-1179 ; 2012:08
Nyckelord [en]
turbocharger, Internal combustion engine, heat transfer, turbocharged engine, on-engine turbocharger, turbocharger performance
Nyckelord [fa]
توربو شارژر، موتور احتراق داخلی، انتقال حرارت، توربوچارجر
Nyckelord [sv]
turbo, turboladdare, förbränningsmotor, värmeöverföring, turboladdad motor
Nationell ämneskategori
Farkostteknik Energiteknik
Identifikatorer
URN: urn:nbn:se:kth:diva-93981ISBN: 978-91-7501-332-9 (tryckt)OAI: oai:DiVA.org:kth-93981DiVA, id: diva2:524801
Presentation
2012-05-22, B242, Brinellvägeb 83, KTH, Stockholm, 10:00 (Engelska)
Opponent
Handledare
Anmärkning
QC 20120504Tillgänglig från: 2012-05-04 Skapad: 2012-05-03 Senast uppdaterad: 2012-05-04Bibliografiskt granskad
Delarbeten
1. Improving Turbocharged Engine Simulation by Including Heat Transfer in the Turbocharger
Öppna denna publikation i ny flik eller fönster >>Improving Turbocharged Engine Simulation by Including Heat Transfer in the Turbocharger
2012 (Engelska)Ingår i: 2012 SAE International, SAE international , 2012Konferensbidrag, Publicerat paper (Refereegranskat)
Abstract [en]

Engine simulation based on one-dimensional gas dynamics is well suited for integration of all aspects arising in engine and power-train developments. Commonly used turbocharger performance maps in engine simulation are measured in non-pulsating flow and without taking into account the heat transfer. Since on-engine turbochargers are exposed to pulsating flow and varying heat transfer situations, the maps in the engine simulation, i.e. GT-POWER, have to be shifted and corrected which are usually done by mass and efficiency multipliers for both turbine and compressor. The multipliers change the maps and are often different for every load point. Particularly, the efficiency multiplier is different for every heat transfer situation on the turbocharger. The aim of this paper is to include the heat transfer of the turbocharger in the engine simulation and consequently to reduce the use of efficiency multiplier for both the turbine and compressor. A set of experiment has been designed and performed on a water-oil-cooled turbocharger, which was installed on a 2 liter GDI engine with variable valve timing, for different load points of the engine and different conditions of heat transfer in the turbocharger. The experiments were the base to simulate heat transfer on the turbocharger, by adding a heat sink before the turbine and a heat source after the compressor. The efficiency multiplier of the turbine cannot compensate for all heat transfer in the turbine, so it is needed to put out heat from the turbine in addition to the using of efficiency multiplier. Results of this study show that including heat transfer of turbocharger in engine simulation enables to decrease the use of turbine efficiency multiplier and eliminate the use of compressor efficiency multiplier to correctly calculate the measured gas temperatures after turbine and compressor.

Ort, förlag, år, upplaga, sidor
SAE international, 2012
Nyckelord
Turbocharger, Heat Transfer, Turbocharged Engine, Simulation
Nationell ämneskategori
Farkostteknik Energiteknik Strömningsmekanik och akustik
Identifikatorer
urn:nbn:se:kth:diva-70200 (URN)2-s2.0-84877171285 (Scopus ID)
Konferens
SAE 2012 World Congress & Exhibition, April 24-26, 2012, Detroit, Michigan, USA
Projekt
On-Engine Turbocharger Performance
Anmärkning

QS 2012

Tillgänglig från: 2012-04-24 Skapad: 2012-01-30 Senast uppdaterad: 2016-12-22Bibliografiskt granskad
2. Turbocharged SI-Engine Simulation with Cold and Hot-Measured Turbocharger Performance Maps
Öppna denna publikation i ny flik eller fönster >>Turbocharged SI-Engine Simulation with Cold and Hot-Measured Turbocharger Performance Maps
2012 (Engelska)Ingår i: Proceedings of ASME Turbo Expo 2012, Vol 5, ASME Press, 2012, s. 671-679Konferensbidrag, Publicerat paper (Refereegranskat)
Abstract [en]

Heat transfer within the turbocharger is an issue in engine simulation based on zero and one-dimensional gas dynamics. Turbocharged engine simulation is often done without taking into account the heat transfer in the turbocharger. In the simulation, using multipliers is the common way of adjusting turbocharger speed and parameters downstream of the compressor and upstream of the turbine. However, they do not represent the physical reality. The multipliers change the maps and need often to be different for different load points. The aim of this paper is to simulate a turbocharged engine and also consider heat transfer in the turbocharger. To be able to consider heat transfer in the turbine and compressor, heat is transferred from the turbine volute and into the compressor scroll. Additionally, the engine simulation was done by using two different turbocharger performance maps of a turbocharger measured under cold and hot conditions. The turbine inlet temperatures were 100 and 600°C, respectively. The turbocharged engine experiment was performed on a water-oil-cooled turbocharger (closed waste-gate), which was installed on a 2-liter gasoline direct-injected engine with variable valve timing, for different load points of the engine. In the work described in this paper, the difference between cold and hot-measured turbocharger performance maps is discussed and the quantified heat transfers from the turbine and to/from the compressor are interpreted and related to the maps.

Ort, förlag, år, upplaga, sidor
ASME Press, 2012
Nyckelord
Turbocharger, Heat transfer, Performance Map, Turbocharged Engine
Nationell ämneskategori
Energiteknik Rymd- och flygteknik Farkostteknik Teknisk mekanik
Identifikatorer
urn:nbn:se:kth:diva-70231 (URN)10.1115/GT2012-68758 (DOI)000324956100070 ()2-s2.0-84881241280 (Scopus ID)978-079184471-7 (ISBN)
Konferens
ASME Turbo Expo 2012: Turbine Technical Conference and Exposition, GT 2012; Copenhagen; Denmark; 11 June 2012 through 15 June 2012
Projekt
On-Engine Turbocharger Performance
Anmärkning

QC 20131106

Tillgänglig från: 2012-03-09 Skapad: 2012-01-30 Senast uppdaterad: 2014-10-01Bibliografiskt granskad

Open Access i DiVA

Habib Aghaali_Lic(11321 kB)84049 nedladdningar
Filinformation
Filnamn FULLTEXT01.pdfFilstorlek 11321 kBChecksumma SHA-512
956fd055c9dccd516b475ec6e89413b2acd71690246b9e1d38e179899329092d0e78b7445675bd984117813196376b8309055ba5a3730c8569271131e996a7c1
Typ fulltextMimetyp application/pdf

Sök vidare i DiVA

Av författaren/redaktören
Aghaali, Habib
Av organisationen
Maskinkonstruktion (Inst.)
FarkostteknikEnergiteknik

Sök vidare utanför DiVA

GoogleGoogle Scholar
Totalt: 84049 nedladdningar
Antalet nedladdningar är summan av nedladdningar för alla fulltexter. Det kan inkludera t.ex tidigare versioner som nu inte längre är tillgängliga.

isbn
urn-nbn

Altmetricpoäng

isbn
urn-nbn
Totalt: 2364 träffar
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf