Digitala Vetenskapliga Arkivet

Ändra sökning
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
MODEL-BASED ANALYSIS OF A TRACKED FORWARDER FOR SUSTAINABLE FORESTRY
KTH, Skolan för industriell teknik och management (ITM).
KTH, Skolan för industriell teknik och management (ITM), Maskinkonstruktion (Inst.).
KTH, Skolan för industriell teknik och management (ITM).
Swedish Forestry Research Institute, Skogforsk.
Visa övriga samt affilieringar
2015 (Engelska)Proceedings (redaktörskap) (Övrigt vetenskapligt)
Abstract [en]

Cut-to-length logging (CTL) is a mechanized harvesting process where trees are delimbed and cut to length directly at the stump. CTL is typically a two-man, two-machine operation with a harvester felling, delimbing, and bucking trees, and a forwarder transporting the cut logs from the felling area to a landing area accessible by trucks, or trains. The main challenges for the manufacturers of forestry machines for CTL logging are to address new customer demands and tougher ergonomic and environmental legislations by finding means that: (1) further increase the harvesting and log transportation productivity, e.g. by enabling operation on eco-soils, (2) reduce the damage to the soil, e.g. by controlling the rut depth and preserving the root layer, (3) reduce exhaust emissions, e.g. by reducing the rolling resistance and evening the contact and tractive forces between all traction units and ground, and (4) reduce the daily vibration dosage for the machine operators, e.g. with efficient chassis and cabin suspension solutions.This paper presents a model-based study of a novel tracked medium-sized forestry machine. The machine is a standard eight-wheeled forwarder of bogie type with the four bogies replaced with four passively suspended track units adapted from an off-road military vehicle. The paper briefly summarize how a tracked forwarder can be modelled and simulated using multi-body simulation software like Adams ATV and how the performance parameters can be evaluated.

Ort, förlag, år, upplaga, sidor
Italy: International Society for Terrain Vehicle Systems (ISTVS) , 2015. , s. 13
Nationell ämneskategori
Skogsvetenskap
Identifikatorer
URN: urn:nbn:se:kth:diva-200133OAI: oai:DiVA.org:kth-200133DiVA, id: diva2:1067693
Konferens
Proceedings of the 13th ISTVS European Conference, Rome
Anmärkning

QC 20170123

Tillgänglig från: 2017-01-23 Skapad: 2017-01-23 Senast uppdaterad: 2017-01-23Bibliografiskt granskad
Ingår i avhandling
1. Suspended forestry machines for sustainable forestry
Öppna denna publikation i ny flik eller fönster >>Suspended forestry machines for sustainable forestry
2016 (Engelska)Doktorsavhandling, sammanläggning (Övrigt vetenskapligt)
Abstract [en]

Cut-to-length (CTL) logging is a mechanized two-machine solution. The harvester processes treestems into smaller logs and a forwarder transports the logs from the logging site to a landing areaaccessible by trucks. The working machines for CTL logging are heavy and their suspension systemis generally rudimentary, basically the only damping is provided by the tires. To meet futuredemands on operator comfort, sustainable forestry, and climate concerns, significant challenges areto find means for reducing daily vibration dosage, soil damage, and rolling resistance.Paper A proposes a full-scale virtual model of a four-wheeled forwarder concept equipped with twopendulum axels with an actively controlled hydraulic suspension system mounted on each wheelaxle. The simulation results are then analyzed to determine the required actuation power.Paper B presents a performance comparison of a six-wheeled medium-sized pendulum-armsuspended forwarder, with three different suspension systems; active, semi-active, and passive. Amethodology to optimize and analyze forestry vehicle suspension performance based on multi-bodydynamic simulations are proposed and applied for the studied forwarder.Paper C is a model-based investigation of the dynamic behavior of a traditional eight-wheeledbogie type of forwarder with the main focus on identifying critical issues and suggesting criteria forassessing the performance of the machine while traveling on sloped and rough terrain.Paper D investigates the performance of a novel all-wheel-drive pendulum-arm suspendedmedium-sized forestry machine with passive and active chassis suspensions. The dynamicperformance of the pendulum-arm machine concept is quantified with simulations and comparedwith a “traditional” bogie-machine.Paper E investigates how to model a tracked forwarder and how the performance comparison canbe evaluated in multi-body simulation software like Adams ATV.Paper F presents a comparison of the dynamic behavior of forestry machines with different types ofpassive chassis suspensions from three perspectives: their gentleness to terrain, operator and theirpotential for improved fuel efficiency.Paper G proposes a 12 degrees-of-freedom multi-body dynamics simulation model of a standardeight-wheeled bogie type of medium-sized forwarder and verifies the simulation model withmeasured data from the field test that was carried out the actual machine.Paper H reconfigures the model presented in Paper G and compares a medium-sized forwarderequipped with two different track units with the performance of a wheeled and bogie-type offorwarder on hard rough ground, as well as on soft soil.

Ort, förlag, år, upplaga, sidor
KTH Royal Institute of Technology, 2016. s. 38
Serie
TRITA-MMK, ISSN 1400-1179 ; 2016:08
Nationell ämneskategori
Farkostteknik
Forskningsämne
Maskinkonstruktion
Identifikatorer
urn:nbn:se:kth:diva-200123 (URN)978-91-7729-227-2 (ISBN)
Disputation
2017-01-25, B319, Brinellvägen 85, Stockholm, 13:00 (Engelska)
Opponent
Handledare
Anmärkning

QC 20170123

Tillgänglig från: 2017-01-23 Skapad: 2017-01-23 Senast uppdaterad: 2017-01-23Bibliografiskt granskad

Open Access i DiVA

fulltext(981 kB)220 nedladdningar
Filinformation
Filnamn FULLTEXT01.pdfFilstorlek 981 kBChecksumma SHA-512
09cc638de6802282226bf0c00a3eb86770d2cf1cfbab56c681908b6737ef03d6429fd6fc6f101d22f503d111d33fe3e4083f6f375a1164789d6c6444c5d72840
Typ fulltextMimetyp application/pdf

Sök vidare i DiVA

Av författaren/redaktören
Ramachandran, PraveenIsmoilov, AbbosSellgren, UlfAndersson, Kjell
Av organisationen
Skolan för industriell teknik och management (ITM)Maskinkonstruktion (Inst.)
Skogsvetenskap

Sök vidare utanför DiVA

GoogleGoogle Scholar
Totalt: 220 nedladdningar
Antalet nedladdningar är summan av nedladdningar för alla fulltexter. Det kan inkludera t.ex tidigare versioner som nu inte längre är tillgängliga.

urn-nbn

Altmetricpoäng

urn-nbn
Totalt: 147 träffar
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf