Endre søk
RefereraExporteraLink to record
Permanent link

Direct link
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annet format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annet språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Physically Based Constitutive Model of Ti-6Al-4V for Arbitrary Phase Composition
Luleå tekniska universitet, Institutionen för teknikvetenskap och matematik, Material- och solidmekanik.
Department of Industrial Production, Högskolan Väst, Trollhättan.
Luleå tekniska universitet, Institutionen för teknikvetenskap och matematik, Material- och solidmekanik.ORCID-id: 0000-0002-2544-9168
2018 (engelsk)Inngår i: International journal of plasticity, ISSN 0749-6419, E-ISSN 1879-2154Artikkel i tidsskrift (Fagfellevurdert) Submitted
Abstract [en]

The principal challenge in producing aerospace components using Ti-6Al-4V alloy is to employ the optimum process window of deformation rate and temperature to achieve desired material properties. Qualitatively understanding the microstructure-property relationship is not enough to accomplish this goal. Developing advanced material models to be used in manufacturing process simulation is the key to compute and optimize the process iteratively. The focus in this work is on physically based flow stress models coupled with microstructure evolution models. Such a model can be used to simulate processes involving complex and cyclic thermo-mechanical loading.

sted, utgiver, år, opplag, sider
2018.
Emneord [en]
Finite Element Method, Dislocation density, Vacancy concentration, Ti-6Al-4V, Alpha, Beta
HSV kategori
Forskningsprogram
Materialmekanik
Identifikatorer
URN: urn:nbn:se:ltu:diva-70904OAI: oai:DiVA.org:ltu-70904DiVA, id: diva2:1249602
Tilgjengelig fra: 2018-09-19 Laget: 2018-09-19 Sist oppdatert: 2018-11-23
Inngår i avhandling
1. Mechanism-based flow stress model for Ti-6Al-4V: applicable for simulation of additive manufacturing and machining
Åpne denne publikasjonen i ny fane eller vindu >>Mechanism-based flow stress model for Ti-6Al-4V: applicable for simulation of additive manufacturing and machining
2018 (engelsk)Doktoravhandling, med artikler (Annet vitenskapelig)
Abstract [en]

Ti-6Al-4V has remarkable properties such as high specific mechanical properties (viz. stiffness, strength, toughness, fatigue resistance), corrosion resistance, biocompatibility etc. These properties make it attractive for applications in aerospace, chemical industry, energy production, surgical implants, etc. Many of these applications have to satisfy high requirements on mechanical properties, which are directly affected by the microstructure. Therefore, it is essential to understand as well as to model the microstructure evolution during manufacturing as well as in-service. Furthermore, this alloy has a narrow temperature and strain rate window of workability.

This work was initiated as part of a project aimed at performing finite element simulations of a manufacturing process chain involving hot forming, welding, machining, additive manufacturing and heat treatment of Ti-6Al-4V components within the aerospace industry. Manufacturing process chain simulations can compute the cumulative effect of the various processes by following the material state through the whole chain and give a realistic prediction of the final component. Capacity to describe material behavior in a wide range of temperatures and strain rates is crucial for this task.

A material model based on the dominant deformation mechanisms of the alloy is assumed to have a more extensive range of validity compared to an empirical relationship. Explicit dislocation dynamics based models are not practically feasible for manufacturing process simulation, and therefore the concept of dislocation density, (length of dislocations per unit volume) developed by (Kocks1966; Bergström, 1970) is followed here. This mean field approach provides a representation of the average behavior of a large number of dislocations, grains, etc. Conrad (1981) studied the influence of various factors like solutes, interstitials, strain, strain rate, temperature, etc., on the strength and ductility of titanium systems and proposed a binary additive relationship for its yield strength. The first component relates to long-range interactions and second short-range relates to lattice resistance for dislocation motion. For high strain rate deformation, this short-range term is extended to include the effects of a viscous drag given by phonon and electron drag (Lesuer et al. 2001).  Immobilisation of dislocation by pile-ups gives hardening and remobilization/annihilation by dislocation glide and climb gives restoration. Globularization is also considered to restore the material. The material model is calibrated using isothermal compression tests at a wide range of temperatures and strain rates. Compression tests performed using Gleeble thermo-mechanical simulator is used at low-strain rates and split-Hopkins pressure bar is used at high strain rates for calibration.

During additive manufacturing depending on the temperature, heating/cooling rates, Ti-6Al-4V undergoes allotropic phase transformation. This transformation results in a variety of textures that can give different mechanical properties.  Based on the texture (Semiatin et al., 1999b; Seetharaman and Semiatin, 2002; Thomas et al., 2005) identified few microstructural features that are relevant to the mechanical properties. The three separate alpha phase fractions; Widmanstatten,  grain boundary, Martensite, and the beta-phase fraction are included in the current model. However, since the strengthening contributions of these individual alpha phases are not known, a linear rule of mixtures for the total alpha-beta composition is developed. This model is calibrated using continuous cooling tests performed by Malinov et al. 2001 with differential scanning calorimeter at varying cooling rates.  

This mechanism-based model is formulated in such a way that it can be implemented in any standard finite element software. In the current work, this is implemented as subroutines within MSC Marc and used for simulation of hot-forming and additive manufacturing. 

sted, utgiver, år, opplag, sider
Luleå: Luleå University of Technology, 2018
Serie
Doctoral thesis / Luleå University of Technology 1 jan 1997 → …, ISSN 1402-1544
Emneord
Material modeling, Ti-6Al-4V, dislocation density, vacancy concentration, additive manufacturing, hot forming, heat treatment
HSV kategori
Forskningsprogram
Materialmekanik
Identifikatorer
urn:nbn:se:ltu:diva-70906 (URN)978-91-7790-207-2 (ISBN)978-91-7790-208-9 (ISBN)
Disputas
2018-11-13, E231, E-Building, LTU, Luleå, 09:00 (engelsk)
Opponent
Veileder
Tilgjengelig fra: 2018-09-25 Laget: 2018-09-19 Sist oppdatert: 2018-11-21bibliografisk kontrollert

Open Access i DiVA

Fulltekst mangler i DiVA

Søk i DiVA

Av forfatter/redaktør
Babu, BijishCharles, CorinneLindgren, Lars-Erik
Av organisasjonen
I samme tidsskrift
International journal of plasticity

Søk utenfor DiVA

GoogleGoogle Scholar

urn-nbn

Altmetric

urn-nbn
Totalt: 312 treff
RefereraExporteraLink to record
Permanent link

Direct link
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annet format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annet språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf