Digitala Vetenskapliga Arkivet

Endre søk
RefereraExporteraLink to record
Permanent link

Direct link
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annet format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annet språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Investigating the dynamic behavior of a mid-sized forestry machine on sloped rough terrain
KTH, Skolan för industriell teknik och management (ITM), Maskinkonstruktion (Inst.).
KTH, Skolan för industriell teknik och management (ITM), Maskinkonstruktion (Inst.).
KTH, Skolan för industriell teknik och management (ITM), Maskinkonstruktion (Inst.).
KTH, Skolan för industriell teknik och management (ITM), Maskinkonstruktion (Inst.).ORCID-id: 0000-0001-6692-2794
Vise andre og tillknytning
2014 (engelsk)Inngår i: 18th International Conference of the ISTVS, 2014Konferansepaper, Publicerat paper (Fagfellevurdert)
Abstract [en]

High-performing forestry machines, such as forwarders, must be able to handle large loads and to operate rough and sloped terrains. Present forwarders are almost exclusively six-or eight-wheeled machines with pairs of wheels mounted on bogies. Consequently, they have very limited chassis damping and levelling capabilities. Traditional forestry machine chassis design is unfavourable from an active machine levelling and operator full body vibration control standpoint. This paper analyses the dynamic behaviour of an existing mid-sized forwarder. The multi-objective concept performance is studied with multi-body simulations and response analysis. The main focus is to identify critical design issues of the machine, specifically while traveling in sloped terrain, and to compare its off-road performance with a new pendulum arm suspended forwarder, referred to as the XT28 machine. The main purpose of the presented investigation is to suggest criteria for assessing the performance of off-road forestry machines when operating on sloped and rough terrain. The target is to assist future research on the newly developed XT28 forwarder that is planned to be in the initial full scale test during the coming year.

sted, utgiver, år, opplag, sider
2014.
Emneord [en]
Chassis levelling, Forestry machine, Ground damage, Hydraulic suspension system, Lateral motion, Multibody dynamics simulation, Off-road, Rough terrain, Rut depth, Shear resistance, Soft soil tire model, Automobile bodies, Chassis, Forestry, Hydraulic machinery, Landforms, Roads and streets, Timber, Transportation, Forestry machines, Ground damages, Multibody dynamics simulations, Rough terrains, Shear resistances, Tire modeling, Suspensions (components), Damage, Machinery, Soil
HSV kategori
Identifikatorer
URN: urn:nbn:se:kth:diva-168354Scopus ID: 2-s2.0-84926227181OAI: oai:DiVA.org:kth-168354DiVA, id: diva2:817353
Konferanse
18th International Conference of the International Society for Terrain-Vehicle Systems, ISTVS 2014, 22 September 2014 through 25 September 2014
Merknad

QC 20150605

Tilgjengelig fra: 2015-06-05 Laget: 2015-06-02 Sist oppdatert: 2017-01-23bibliografisk kontrollert
Inngår i avhandling
1. Suspended forestry machines for sustainable forestry
Åpne denne publikasjonen i ny fane eller vindu >>Suspended forestry machines for sustainable forestry
2016 (engelsk)Doktoravhandling, med artikler (Annet vitenskapelig)
Abstract [en]

Cut-to-length (CTL) logging is a mechanized two-machine solution. The harvester processes treestems into smaller logs and a forwarder transports the logs from the logging site to a landing areaaccessible by trucks. The working machines for CTL logging are heavy and their suspension systemis generally rudimentary, basically the only damping is provided by the tires. To meet futuredemands on operator comfort, sustainable forestry, and climate concerns, significant challenges areto find means for reducing daily vibration dosage, soil damage, and rolling resistance.Paper A proposes a full-scale virtual model of a four-wheeled forwarder concept equipped with twopendulum axels with an actively controlled hydraulic suspension system mounted on each wheelaxle. The simulation results are then analyzed to determine the required actuation power.Paper B presents a performance comparison of a six-wheeled medium-sized pendulum-armsuspended forwarder, with three different suspension systems; active, semi-active, and passive. Amethodology to optimize and analyze forestry vehicle suspension performance based on multi-bodydynamic simulations are proposed and applied for the studied forwarder.Paper C is a model-based investigation of the dynamic behavior of a traditional eight-wheeledbogie type of forwarder with the main focus on identifying critical issues and suggesting criteria forassessing the performance of the machine while traveling on sloped and rough terrain.Paper D investigates the performance of a novel all-wheel-drive pendulum-arm suspendedmedium-sized forestry machine with passive and active chassis suspensions. The dynamicperformance of the pendulum-arm machine concept is quantified with simulations and comparedwith a “traditional” bogie-machine.Paper E investigates how to model a tracked forwarder and how the performance comparison canbe evaluated in multi-body simulation software like Adams ATV.Paper F presents a comparison of the dynamic behavior of forestry machines with different types ofpassive chassis suspensions from three perspectives: their gentleness to terrain, operator and theirpotential for improved fuel efficiency.Paper G proposes a 12 degrees-of-freedom multi-body dynamics simulation model of a standardeight-wheeled bogie type of medium-sized forwarder and verifies the simulation model withmeasured data from the field test that was carried out the actual machine.Paper H reconfigures the model presented in Paper G and compares a medium-sized forwarderequipped with two different track units with the performance of a wheeled and bogie-type offorwarder on hard rough ground, as well as on soft soil.

sted, utgiver, år, opplag, sider
KTH Royal Institute of Technology, 2016. s. 38
Serie
TRITA-MMK, ISSN 1400-1179 ; 2016:08
HSV kategori
Forskningsprogram
Maskinkonstruktion
Identifikatorer
urn:nbn:se:kth:diva-200123 (URN)978-91-7729-227-2 (ISBN)
Disputas
2017-01-25, B319, Brinellvägen 85, Stockholm, 13:00 (engelsk)
Opponent
Veileder
Merknad

QC 20170123

Tilgjengelig fra: 2017-01-23 Laget: 2017-01-23 Sist oppdatert: 2017-01-23bibliografisk kontrollert

Open Access i DiVA

Fulltekst mangler i DiVA

Scopus

Søk i DiVA

Av forfatter/redaktør
Ismoilov, AbbosSellgren, UlfPirnazarov, AbdurasulAnderson, Kjell
Av organisasjonen

Søk utenfor DiVA

GoogleGoogle Scholar

urn-nbn

Altmetric

urn-nbn
Totalt: 143 treff
RefereraExporteraLink to record
Permanent link

Direct link
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annet format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annet språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf