Endre søk
RefereraExporteraLink to record
Permanent link

Direct link
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annet format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annet språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
All-natural and highly flame-resistant freeze-cast foams based on phosphorylated cellulose nanofibrils
KTH, Skolan för kemi, bioteknologi och hälsa (CBH), Fiber- och polymerteknologi, Fiberteknologi. (Fiber Technology)ORCID-id: 0000-0003-4108-2279
KTH, Skolan för kemi, bioteknologi och hälsa (CBH), Fiber- och polymerteknologi, Fiberteknologi. KTH, Skolan för kemi, bioteknologi och hälsa (CBH), Centra, Wallenberg Wood Science Center.ORCID-id: 0000-0001-8622-0386
2018 (engelsk)Inngår i: Nanoscale, ISSN 2040-3364, E-ISSN 2040-3372, Vol. 10, nr 8, s. 4085-4095Artikkel i tidsskrift (Fagfellevurdert) Published
Abstract [en]

Pure cellulosic foams suffer from low thermal stability and high flammability, limiting their fields of application. Here, light-weight and flame-resistant nanostructured foams are produced by combining cellulose nanofibrils prepared from phosphorylated pulp fibers (P-CNF) with microfibrous sepiolite clay using the freeze-casting technique. The resultant nanocomposite foams show excellent flame-retardant properties such as self-extinguishing behavior and extremely low heat release rates in addition to high flame penetration resistance attributed mainly to the intrinsic charring ability of the phosphorylated fibrils and the capability of sepiolite to form heat-protective intumescent-like barrier on the surface of the material. Investigation of the chemical structure of the charred residue by FTIR and solid state NMR spectroscopy reveals the extensive graphitization of the carbohydrate as a result of dephosphorylation of the modified cellulose and further dehydration due to acidic catalytic effects. Originating from the nanoscale dimensions of sepiolite particles, their high specific surface area and stiffness as well as its close interaction with the phosphorylated fibrils, the incorporation of clay nanorods also significantly improves the mechanical strength and stiffness of the nanocomposite foams. The novel foams prepared in this study are expected to have great potential for application in sustainable building construction.

sted, utgiver, år, opplag, sider
Royal Society of Chemistry, 2018. Vol. 10, nr 8, s. 4085-4095
Emneord [en]
Phosphorylated cellulose nanofibrils, flame-resistant
HSV kategori
Forskningsprogram
Fiber- och polymervetenskap
Identifikatorer
URN: urn:nbn:se:kth:diva-224335DOI: 10.1039/c7nr09243aISI: 000426148500059PubMedID: 29431818Scopus ID: 2-s2.0-85042626360OAI: oai:DiVA.org:kth-224335DiVA, id: diva2:1191119
Forskningsfinansiär
Swedish Foundation for Strategic Research
Merknad

QC 20180316

Tilgjengelig fra: 2018-03-16 Laget: 2018-03-16 Sist oppdatert: 2019-12-20bibliografisk kontrollert
Inngår i avhandling
1. Phosphorylated Cellulose Nanofibrils: A Nano-Tool for Preparing Cellulose-Based Flame-Retardant Materials
Åpne denne publikasjonen i ny fane eller vindu >>Phosphorylated Cellulose Nanofibrils: A Nano-Tool for Preparing Cellulose-Based Flame-Retardant Materials
2018 (engelsk)Doktoravhandling, med artikler (Annet vitenskapelig)
Abstract [en]

The growing awareness of the need for a circular society and a circular chemistry has spurred the interest in using wood-based cellulose as a raw material for the preparation of new macroscopic devices and construction materials. The interest has been particularly focused on cellulose nanofibrils (CNF), which has led to the development of new material concepts through a nanoscale bottom-up engineering using renewable CNF. In order to be industrially applicable, the CNF must however possess a set of properties among which good flame-retardation is crucial. This thesis presents a) a way to chemically modify delignified wood fibers by phosphorylation to produce phosphorylated CNF, b) the fabrication and characterization of flame-retardant thin films, coatings and nanocomposite foams from the phosphorylated fibrils and c) the flame-retardant mechanisms of the phosphorylated CNF-based substances.

Chemically delignified fibers have been phosphorylated by (NH4)2HPO4 in the presence of urea, and the resulting material has been used to prepare phosphorylated CNF (P-CNF). The flame-retardant properties of the phosphorylated fibrils were significantly improved by the phosphorus functionalization of the cellulose chain, converting the fibrils to an inherently flame-retardant material. The P-CNF was applied to make thin films/coatings using the Layer-by-Layer (LbL) technique. All-cellulose free-standing films were prepared through LbL self-assembly of the P-CNF and fibrils prepared from aminated cellulose-rich fibers (cationic CNF). The LbL-assembled film showed a high thermal stability, excellent flame resistance and superior mechanical performance. P-CNF/chitosan (CH) assemblies were also prepared as a fire protection for polyurethane (PU) foams. The five bilayer CH/P-CNF coating yielded a nano-exoskeleton on the surface of PU foam, shown to be capable of increasing the modulus of the foam by a factor of three and entirely preventing its melt dripping during the flammability testing.

P-CNF/montmorillonite (MMT), sepiolite (Sep) clay or sodium hexametaphosphate (SHMP) films were also fabricated by vacuum filtration/solvent casting of the composite suspensions, and the structural and compositional features of these different films were used to study the mechanisms behind their flame-retardant properties. Only the P-CNF/MMT films were able to completely prevent ignition during cone calorimetry, when used as coatings for highly flammable polyethylene (PE) films and this was mainly ascribed to the excellent barrier properties of these films. The results also showed that the excellent strength and stiffness of the P-CNF/MMT samples, compared to those of the P-CNF/Sep and P-CNF/SHMP films, were essential for maintaining the barrier effect during combustion. Finally, nanostructured foams were prepared by freeze-casting of the P-CNF/Sep suspensions. The foams showed extensive flame-resistance, maintaining a temperature drop of more than 600 °C across the thickness during the flame penetration test. This performance was related mainly to the charring capability of the phosphorylated fibrils combined with the significant thermal insulation of Sep clay.

sted, utgiver, år, opplag, sider
Stockholm: KTH Royal Institute of Technology, 2018. s. x, 70
Serie
TRITA-CBH-FOU ; 2018:3
Emneord
phosphorylated cellulose nanofibrils, flame-retardant
HSV kategori
Forskningsprogram
Fiber- och polymervetenskap
Identifikatorer
urn:nbn:se:kth:diva-224226 (URN)978-91-7729-696-6 (ISBN)
Disputas
2018-04-13, F3, Lindstedtsvägen 26, KTH, Stockholm, 14:00 (engelsk)
Opponent
Veileder
Forskningsfinansiär
Swedish Foundation for Strategic Research
Merknad

QC 20180321

Tilgjengelig fra: 2018-03-21 Laget: 2018-03-14 Sist oppdatert: 2019-12-20bibliografisk kontrollert

Open Access i DiVA

Fulltekst mangler i DiVA

Andre lenker

Forlagets fulltekstPubMedScopus

Søk i DiVA

Av forfatter/redaktør
Ghanadpour, MaryamWågberg, Lars
Av organisasjonen
I samme tidsskrift
Nanoscale

Søk utenfor DiVA

GoogleGoogle Scholar

doi
pubmed
urn-nbn

Altmetric

doi
pubmed
urn-nbn
Totalt: 938 treff
RefereraExporteraLink to record
Permanent link

Direct link
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annet format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annet språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf