Digitala Vetenskapliga Arkivet

Endre søk
RefereraExporteraLink to record
Permanent link

Direct link
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annet format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annet språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Workpiece steels protecting cutting tools from wear: A study of the effects of alloying elements on material transfer and coating damage mechanisms
Uppsala universitet, Teknisk-naturvetenskapliga vetenskapsområdet, Tekniska sektionen, Institutionen för teknikvetenskaper, Tillämpad materialvetenskap.
2016 (engelsk)Doktoravhandling, med artikler (Annet vitenskapelig)
Abstract [en]

The vision of this thesis is to improve the machinability of workpiece steels. Workpiece material frequently transfers to the cutting tools during machining, and the transfer layers then forming on the tools may give both good and bad effects on machining performance and tool life. The objective of this work is to understand the effects of alloying element additions to workpiece steels on material transfer and the roles of the formed transfer layers on friction characteristics and wear of tools.

To isolate and study the influence of the individual alloying elements, model steels are specifically designed. These steels include one reference with C as the only alloying element and others alloyed also with single additions or combined additions of 1 mass% Si, Mn, Cr and Al. The experiments are performed using both a sliding test, simulating the material transfer in milling, and a turning test.

In a sliding contact, the mode of transfer is strongly dependent on the normal load and sliding speed. Material transfer initiates extremely fast, in less than 0.025 s, and characteristic transfer layers develop during the first few seconds. The different steel compositions result in the formation of different types of oxides in the transfer layers. At the workpiece/tool interface where the conditions involve high temperature, high pressure and low oxygen supply, easily oxidized alloying elements in the steel are preferentially transferred, enriched and form a stable oxide on the tool surface. The degree of enrichment of the alloying elements in the oxides is strongly related to their tendencies to become oxidized.

The difference in melting temperature of the oxides, and thus the tendency to soften during sliding, explains the difference in the resulting friction coefficient. The widest differences in friction coefficients are found between the Si and Al additions. A Si containing oxide shows the lowest friction and an Al containing oxide the highest.

The damage mechanism of coated tools is chiefly influenced by the form and shear strength of the transferred material. Absence of transfer layer or non-continuous transferred material leads to continuous wear of the coating. Contrastingly, continuous transfer layers protect it from wear. However, transfer layers with very high shear strength result in high friction heat and a large amount of steel transfer. This leads to rapid coating cracking or adhesive wear.

sted, utgiver, år, opplag, sider
Uppsala: Acta Universitatis Upsaliensis, 2016. , s. 76
Serie
Digital Comprehensive Summaries of Uppsala Dissertations from the Faculty of Science and Technology, ISSN 1651-6214 ; 1449
Emneord [en]
Metal cutting, Steel, Cutting tools, Transfer, Coating, Sliding
HSV kategori
Forskningsprogram
Teknisk fysik med inriktning mot tribomaterial
Identifikatorer
URN: urn:nbn:se:uu:diva-306190ISBN: 978-91-554-9743-9 (tryckt)OAI: oai:DiVA.org:uu-306190DiVA, id: diva2:1039999
Disputas
2016-12-16, Häggsalen, Ångströmlaboratoriet, Lägerhyddsvägen 1, Uppsala, 13:15 (engelsk)
Opponent
Veileder
Tilgjengelig fra: 2016-11-23 Laget: 2016-10-26 Sist oppdatert: 2016-11-28
Delarbeid
1. Influence of contact parameters on material transfer from steel to TiN coated tool: optimisation of a sliding test for simulation of material transfer in milling
Åpne denne publikasjonen i ny fane eller vindu >>Influence of contact parameters on material transfer from steel to TiN coated tool: optimisation of a sliding test for simulation of material transfer in milling
2016 (engelsk)Inngår i: Tribology - Materials, Surfaces & Interfaces, ISSN 1751-5831, E-ISSN 1751-584X, Vol. 10, nr 3, s. 107-116Artikkel i tidsskrift (Fagfellevurdert) Published
Abstract [en]

Sliding between crossed cylinders, one large work material cylinder and one smaller coated tool cylinder, can be used to simulate the contact between a chip and the rake face of a cutting tool. However accurate simulations require the mode of material transfer in the test to match that in real machining. The mode is strongly dependent on normal load and sliding speed, and it is classified into four types; negligible oxide, only iron oxide, iron oxide and alloy oxide, and metallic transfer with coating cracking. A high load proved to be most important to accurately simulate the mode and area of material transfer occurring in milling. The diameter of the work material cylinder influences the shape of the contact mark, but has no influence on the mode of transfer. This means smaller work material diameters can favorably be used, reducing costs and facilitating handling during both tests and analysis.

Emneord
Sliding test, Material transfer, Milling, Coating
HSV kategori
Forskningsprogram
Teknisk fysik med inriktning mot tribomaterial
Identifikatorer
urn:nbn:se:uu:diva-299592 (URN)10.1080/17515831.2016.1202548 (DOI)000444633000004 ()
Tilgjengelig fra: 2016-07-23 Laget: 2016-07-23 Sist oppdatert: 2019-12-19bibliografisk kontrollert
2. Effect of Si and Cr additions to carbon steel on material transfer in a steel/TiN coated tool sliding contact
Åpne denne publikasjonen i ny fane eller vindu >>Effect of Si and Cr additions to carbon steel on material transfer in a steel/TiN coated tool sliding contact
2016 (engelsk)Inngår i: Tribology International, ISSN 0301-679X, E-ISSN 1879-2464, Vol. 97, s. 337-348Artikkel i tidsskrift (Fagfellevurdert) Published
Abstract [en]

A crossed cylinders sliding test, simulating the contact between the chip and the tool in machining, is used to evaluate material transfer and friction characteristics of a TiN coating against specifically designed model steels. These include one base reference, only alloyed with C (Base steel) and two alloyed also with 1 mass% Si or Cr. When sliding against the Base steel, an Fe-O layer is formed on the coating. Against the Si and Cr alloyed steels, Fe-Si-O and Fe-Cr-O layers are formed. In these oxides, Si and Cr are enriched, i.e. preferentially transferred from the steels. Compared to the Base steel, the friction coefficient is significantly lower against the Si alloyed steel and higher against the Cr alloyed steel.

Emneord
Transfer, Coating, Sliding
HSV kategori
Forskningsprogram
Teknisk fysik med inriktning mot tribomaterial
Identifikatorer
urn:nbn:se:uu:diva-284092 (URN)10.1016/j.triboint.2016.01.032 (DOI)000374194900035 ()
Tilgjengelig fra: 2016-04-15 Laget: 2016-04-15 Sist oppdatert: 2017-11-30bibliografisk kontrollert
3. Influence of Mn and Al additions to carbon steel on material transfer and coating damage mechanism in a sliding contact between steel and TiN coated HSS tool
Åpne denne publikasjonen i ny fane eller vindu >>Influence of Mn and Al additions to carbon steel on material transfer and coating damage mechanism in a sliding contact between steel and TiN coated HSS tool
2016 (engelsk)Inngår i: Tribology International, ISSN 0301-679X, E-ISSN 1879-2464, Vol. 101, s. 414-424Artikkel i tidsskrift (Fagfellevurdert) Published
Abstract [en]

A crossed cylinders sliding test, simulating the contact between the chip and the cutting tool, is used to evaluate material transfer, friction characteristics and coating damage of a TiN coated high speed steel against specifically designed model steels. These steels include one reference with C as the only alloy element (Base steel), and two alloyed also with 1 mass% Mn or Al. When sliding against the Base steel, an Fe–O layer forms on the coating and protects it from wear. Against the Mn alloyed steel, Fe–Mn–O forms, which has no protective effect. Against the Al alloyed steel, an almost pure Al–O layer forms. This leads to the highest friction, rapidly causing substrate softening and coating fracture.

Emneord
Transfer, Coating, Sliding
HSV kategori
Forskningsprogram
Teknisk fysik med inriktning mot tribomaterial
Identifikatorer
urn:nbn:se:uu:diva-294613 (URN)10.1016/j.triboint.2016.04.036 (DOI)000379563700044 ()
Tilgjengelig fra: 2016-05-25 Laget: 2016-05-25 Sist oppdatert: 2018-01-10bibliografisk kontrollert
4. Effect of combined additions of Si, Mn, Cr and Al to carbon steel on material transfer in a steel/TiN coated tool sliding contact
Åpne denne publikasjonen i ny fane eller vindu >>Effect of combined additions of Si, Mn, Cr and Al to carbon steel on material transfer in a steel/TiN coated tool sliding contact
2017 (engelsk)Inngår i: Wear, ISSN 0043-1648, E-ISSN 1873-2577, Vol. 388-389, s. 9-17Artikkel i tidsskrift (Fagfellevurdert) Published
Abstract [en]

Material transferred from steel work materials onto the cutting tools largely affects tool life and machining performance. This material transfer is strongly influenced by the steel composition, and different alloying can have very different effects. Crossed cylinders sliding tests can be used to simulate the contact between the chip and the tool in machining. In this work such a test is used to evaluate material transfer and friction characteristics of a TiN coated tool sliding against five model steels. These model steels are especially designed to study the effects from specific combination of alloy elements, i.e. the steels, containing 0.55 mass% C and 1 mass% Si, are alloyed with one or more of 1 mass% Mn, Cr and Al. When using the steels alloyed without Al, Si-rich oxide layers are formed on the coating, resulting in a low friction coefficient. When using the steels alloyed with Al, almost pure Al–O layers are formed, resulting in a higher friction coefficient and rapid coating cracking. Essentially, the most easily oxidized alloy element is most strongly enriched in the oxide and decides the main mechanism of the material transfer and friction behavior.

Emneord
Sliding, Steel, PVD coatings, Cutting tools, Transfer
HSV kategori
Forskningsprogram
Teknisk fysik med inriktning mot tribomaterial
Identifikatorer
urn:nbn:se:uu:diva-306189 (URN)10.1016/j.wear.2017.04.028 (DOI)000412614900003 ()
Konferanse
NORDTRIB 2016: The 17th Nordic Symposium on Tribology,14th - 17th June 2016 - Aulanko, Hämeenlinna, Finland
Tilgjengelig fra: 2016-10-26 Laget: 2016-10-26 Sist oppdatert: 2017-12-22bibliografisk kontrollert
5. Effect of Si and Al additions to carbon steel on material transfer and coating damage mechanism in turning with CVD coated tools
Åpne denne publikasjonen i ny fane eller vindu >>Effect of Si and Al additions to carbon steel on material transfer and coating damage mechanism in turning with CVD coated tools
2016 (engelsk)Inngår i: Wear, ISSN 0043-1648, E-ISSN 1873-2577, Vol. 368-369, s. 379-389Artikkel i tidsskrift (Fagfellevurdert) Published
Abstract [en]

Material transfer from the work materials to the tools strongly influences machining performance and tool life. The influence of Si and Al additions to carbon steel on the material transfer and coating wear in turning with CVD coated carbide tools is investigated. Three model steels are specifically designed to separately study the effects of the individual alloying elements: one reference steel with C as the only alloying element (Base steel), and two steels alloyed also with 1 mass% Si or Al. In the region around the depth of cut on the rake face, where the outside edge of the chip passes over the tool surface, the coating is worn mainly by abrasion when cutting the Base steel. When cutting the Si alloyed steel, an almost pure Si–O transfer layer covers the coating surface, which protects it from wear. When cutting the Al alloyed steel, an almost pure Al–O transfer layer forms on the coating. This layer promotes steel transfer and associated adhesive wear of the coating, which rapidly results in coating detachment and eventually causes notch wear. In the crater region, only the Al alloyed steel results in a transfer layer, an AlN layer that reduces the crater wear.

Emneord
Steel, CVD coatings, Cutting tools, Transfer
HSV kategori
Forskningsprogram
Teknisk fysik med inriktning mot tribomaterial
Identifikatorer
urn:nbn:se:uu:diva-306187 (URN)10.1016/j.wear.2016.10.011 (DOI)000390733400041 ()
Tilgjengelig fra: 2016-10-26 Laget: 2016-10-26 Sist oppdatert: 2017-08-08bibliografisk kontrollert

Open Access i DiVA

fulltext(7771 kB)595 nedlastinger
Filinformasjon
Fil FULLTEXT01.pdfFilstørrelse 7771 kBChecksum SHA-512
de1bf6941949cf522940060dc64bb20bf6a5bcec46afbb34a8340a01b0d0f215b67b3e329c9e5211e82a18dc7b2798bd69263f06955bbc750390e2f9b559343b
Type fulltextMimetype application/pdf
Kjøp publikasjonen >>

Søk i DiVA

Av forfatter/redaktør
Aiso, Toshiharu
Av organisasjonen

Søk utenfor DiVA

GoogleGoogle Scholar
Totalt: 595 nedlastinger
Antall nedlastinger er summen av alle nedlastinger av alle fulltekster. Det kan for eksempel være tidligere versjoner som er ikke lenger tilgjengelige

isbn
urn-nbn

Altmetric

isbn
urn-nbn
Totalt: 1995 treff
RefereraExporteraLink to record
Permanent link

Direct link
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annet format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annet språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf